Reset The Pma400 And Set The Time And Date; Changing The Language; Connecting/Disconnecting The Pma400 To/From Your Pc - Archos PMA 400 User Manual

4. Reset the PMA400 and set the time and date

It will turn off. Turn on the PMA400 now and it will boot up the new operating system. You
should check to verify that the clock time and date are correct after a reset.
1.5

Changing the Language

The PMA400 interface can be set to English (default), French, German, Italian, or Spanish. To
change the language, go to Settings then Language and select your desired language. Click OK
and wait a few moments. Your PMA400 will return in shortly in the new language.
2

Connecting/Disconnecting the PMA400 to/from your PC

Note that when the PMA400 is connected to a computer, it will use more energy than usual. Your
battery power will be consumed at a higher rate than normal. If the PMA400 looses power while
connected to your computer you could damage your directory structure and/or loose data. Thus,
you should always use the AC adapter when connected to your computer. Be careful to
understand the disconnection procedure also since disconnecting incorrectly can lead to data loss
or computer/PMA400 freeze up. The PMA400 is not compatible with Windows
®
95, or Windows 98 (first edition). While connected as a hard disk to your computer, the PMA400
buttons are blocked and are no longer functional.
In order for the new software
update to take effect, you need to
reset the PMA400. Once you
disconnect it from the computer,
use a small pointed object such as a
paper clip, to press the recessed
RESET button on the bottom of the
PMA400.
10
® ®
NT, Windows