To Set Unit To Sleep Mode; Emergency Operation - Daewoo DSB-F183L Owner's Manual

TO SET UNIT TO SLEEP MODE

When you are going to sleep, select this feature and the unit will cool off the room to the desired temperature and then
increase that temperature throughout the night.
1. Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and "ON" will light in the remote display.
3. Press the SLEEP button on the remote controller. The
unit will then be in the sleep mode and will cool the
room to the desired temperature. After a while the unit
will increase the temperature again.
This process will then repeat.
AUTO

EMERGENCY OPERATION

If the remote control is lost, broken or has no batteries, follow the procedures below:
1. Open the indoor unit's cover and make sure the
EMERGENCY/REMOTE switch is set to the EMER-
GENCY position.
EMERGENCY/REMOTE Switch
3. To turn the unit off, slide the EMERGENCY/ REMOTE
switch to the REMOTE position.
EMERGENCY/REMOTE Switch
2. Press the MODE button to select the desired mode.
Then, set the desired temperature using the TEMP.
or buttons.
TO CANCEL SLEEP MODE:
To cancel sleep mode, press the SLEEP button again;
the SLEEP indicator will disappear in the display.
2. The unit will then turn on and depending on the room
temperature, it will select the cool or dehumidifier
mode, fan speed and fan direction automatically.
12