Random Playback; Rapid Playback; Adjusting The Picture - Magnavox NB500MG1F - Blu-Ray Disc Player Owner's Manual

Random Playback

This function shuffles the playback order of tracks / files.
1
In stop mode, press [MODE] twice.
1 2 3
- - / 16
Random
CD_DA
0:36
1
1:14
2
0:45
3
0:50
4
0:53
5
0:20
6
0:54
7
Page Down
e.g.) audio CD
1 audio CD : Track information
JPEG : File information
audio CD : "CD-DA" will be displayed.
2
JPEG : Current Disc, SD Memory Card, or
folder name will be displayed.
3 Track / File list : Track / File list in the original order
will be displayed.
Operation : Press [RED] to go to the previous
4
Guide page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Total playback time of all tracks / files.
5
Playback status
6
2
Press [B (play)] to start random playback.
To exit from the random playback mode:
• Press [MODE] in stop mode.
Note
• During the random playback, press [C (stop)] once
to set the resume point, and then press [B (play)] to
resume random playback from where [C (stop)] was
pressed (audio CD) or from beginning of the file
where [C (stop)] was pressed (JPEG).
• To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until
" Track" appears during playback. To repeat the
entire random selection press [REPEAT] repeatedly
until " All" appears during playback.
• Playback from a desired track / file is not available
during random playback.
• Press [RETURN] to switch to the program playback
mode.
24
PLAYBACK
4 5 6
Total 1 : 13 : 29

Rapid Playback

This function plays back approximately at 1.3 times the
normal playback while keeping the sound output. This
function is available only on discs recorded in the Dolby
Digital format.
1
During playback, press [MODE] repeatedly
until the Rapid playback setting appears.
Off
2
Press [OK] or [s / B] to switch
"Off" : Plays back in normal speed.
" : Plays back approximately at 1.3 times of normal
"
playback.
3
Press [B] to return to normal playback.
Note
• Picture adjustment and audio language setting
cannot be changed during this function.
• Virtual surround does not work during this function.
• This function may not work at some points on a disc.
• During this function, 2ch LPCM will be output from
HDMI OUT jack and DIGITAL OUT jack.

Adjusting the Picture

You can adjust the picture quality.
1
During playback, press [MODE] repeatedly
until appears.
2
Use [K / L] to select your desired item, then
use [s / B] to adjust the setting.
Black Level
Noise Reduction
e.g.) DVD-video
S Black level
You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can select
"On" or "Off".
"On" : Makes the dark parts brighter.
"Off" : Shows the original picture as recorded.
(1.3x), or off.
On
Off
EN