Setting The Screen Saver Activation Time; Resetting Settings To The Factory Defaults; Downloading Player Update Software; Determining Whether The Network Connection Is Active - Insignia NS-WBRDVD - Blu-Ray Disc Player User Manual

Connected Blu-Ray Disc Player

Setting the screen saver activation time

Your player has a screen saver feature that turns the
screen black when your player is inactive. You can
set the amount of time you want your player to wait
before activating the screen saver.
To set the screen saver activation time:
1 Press ENTER. The Settings menu opens.
Audio
Language
Parental
Settings
System
Network
Displa y
2 Press or to select System. The System menu
opens.
3 Press , press
Duration, then press ENTER.
4 Press one or more times to select the amount
of time you want the player to wait before
activating the screen saver feature.
5 Press to go to the previous menu.

Resetting settings to the factory defaults

To reset settings to the factory defaults:
1 Press ENTER. The Settings menu opens.
Audio
Language
Parental
Settings
System
Network
Displa y
2 Press or to select System. The System menu
opens.
3 Press , press
then press ENTER. A message appears asking
you to confirm your selection.
4 Select OK, then press ENTER to close the
message box.
5 Press to go to the previous menu.
System
Opt ical Disc Auto Play On
BD- Live Internet Access Always Allow
USB (1.9GB Free)
BD- Live Storage
Erase Blu-ray Storage
Scr een Saver Duration 5 M inutes
Reset Settings
Update Via Network Required Storage:84 MB
or to select Screen Saver
System
Opt ical Disc Auto Play On
BD- Live Internet Access Always Allow
BD- Live Storage USB (1.9GB Free)
Erase Blu-ray Storage
Scr een Saver Duration 5 M inutes
Reset Settings
Update Via Network Required Storage:84 MB
or to select Reset Settings,
www.insigniaproducts.com

Downloading player update software

To download player update software:
1 Press ENTER. The Settings menu opens.
Audio
Language
Parental
Settings
System
Network
Displa y
2 Press or to select System. The System menu
opens.
3 Press , press
Network, then press ENTER.
4 Follow the on-screen instructions for updating
the software.
5 Press to go to the previous menu.
Determining whether the network
connection is active
To determine whether the network connection is
active:
1 Press ENTER. The Settings menu opens.
2 Press or to select Network.
3 Press , press
ENTER. The IP Settings screen opens. If the
network connection is active, Link Up appears
next to Link Status. If the network connection is
not active, Link Down appears next to Link
Status.
Link Status
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
4 Press to go to the previous menu.
System
Opt ical Disc Auto Play On
BD- Live Internet Access Always Allow
BD- Live Storage USB (1.9GB Free)
Erase Blu-ray Storage
Scr een Saver Duration 5 M inutes
Reset Settings
Update Via Network Required Storage:84 MB
or to select Update Via
or to select Wired, then press
IP Settings
Link Down
Dynam ic
N/A
N/A
N/A
N/A
N/A
App ly
Cancel
17