SPECIFICATIONS Entry 1 Entry 2 Type Entry 1 Entry 2 Entry 3 Entry 4 TYPE 1 1/2" NPT 1/2" NPT 1/2" NPT 3/4" NPT TYPE 2 3/4" NPT 3/4" NPT 3/4" NPT 3/4" NPT Entry 3 TYPE 3 3/4" NPT Detector type is determined upon order.
Page 5
The following instructions apply to equipment covered by ATEX/IECEx/UKEX/UL certificate number: 1- PQ Series gas detectors for monitoring a very wide range of toxic and flammable gases and oxygen. PQ series are available as Flameproof (Ex db/tb) detectors suitable for use in Zone 1/2 and Zone 21/22 hazardous areas.
Page 6
14. All electrical connections should be made in accordance with any relevant local or national legislation, standards or codes of practice. Prosense detectors can operate between 12 - 24 VDC. The connection, grounding, cabling details are explained in this guide at relevant sections.
Prosense that the part failed due to defective materials or workmanship. Warrant is only valid if product is shipped prepaid to Prosense at Kartal, Istanbul TURKEY, in a package equal to or in the original container accompanied by a detailed description of any issue. Prosense reserves the right to charge for any site attendance where any fault is not found with the equipment in case return of goods is not practicable.
Page 8
EU Declaration of Conformity Prosense Teknoloji San Ltd. Şti declares the PQ series products to be in accordance with the following standards and directives. Name and address of Manufacturer: Prosense Teknoloji San Ltd Şti Cumhuriyet Mah. Mermer Sok No:16 34876 - Kartal – İstanbul – Türkiye...
Need help?
Do you have a question about the PQ Series and is the answer not in the manual?
Questions and answers