Switching The Hdmi Audio Setting; Resetting The Hdmi Connection; About Hdmi; Using This Unit With A Pioneer Flat - Pioneer 575 - STEINER MARINE 7X50 Operating Instructions Manual

09 Other connections

Switching the HDMI audio setting

To listen to audio from the HDMI interconnect,
make sure you've specified the HDMI audio
output setting.
1 Switch the system into standby.
Press SHIFT+SETUP and use / to
2
choose HDMI OUT then press ENTER.
Use / to choose the setting you want
3
then press ENTER.
1
• AUDIO ON
through the HDMI interconnect
• AUDIO OFF – Switches off HDMI audio

Resetting the HDMI connection

If you get an error message (the display shows
HDMI ERR) or if the screen goes blank (for
example, after changing the resolution), check
the troubleshooting guide on page 46. If this
doesn't solve the problem, follow the steps
below to reset the HDMI connection.
1 Switch the system into standby.
Press SHIFT+SETUP and use / to
2
choose HDMI INI then press ENTER.
The system will restart and the HDMI settings
are automatically reset to the factory defaults.
See Video Output settings on page 30 for more
on these settings.
Note
1 Audio output from the HDMI terminal is 2 channel linear PCM only.
2 This system is compatible with all Pioneer flat panel TVs from 2003 onward.
3 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer
Customer Support division for more information on obtaining an SR+ cable.
36
En
– Audio signals are output

About HDMI

HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI
was developed to provide the technologies of
High Bandwidth Digital Content Protection
(HDCP) as well as Digital Visual Interface (DVI)
in one specification. HDCP is used to protect
digital content transmitted and received by DVI-
compliant displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multichannel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Using this unit with a Pioneer
Flat Panel TV
If you have a Pioneer flat panel TV
3
an SR+ cable to connect it to this unit and
take advantage of various convenient features,
such as controlling this unit via the flat panel
TV's remote sensor, automatic video input
switching of the flat panel TV, and automatic
volume muting on the flat panel TV.
2
, you can use