Dvd/Cd/Video Cd Player - Pioneer 575 - STEINER MARINE 7X50 Operating Instructions Manual

Additional information
Problem
SND.DEMO shows in
the display and the unit
can't be controlled.

DVD/CD/Video CD player

Problem
The disc is ejected
automatically after
loading.
Playback not possible.
Picture playback stops
and buttons cannot be
used.
Settings are canceled.
No picture/No color.
Screen is stretched or
aspect doesn't change.
When recorded on a
VCR or passed through
an AV selector, there is
disturbance in the
playback picture.
Picture disturbance
during playback or dark.
Noticeable difference in
DVD and CD volume.
Remedy
• Press and hold  (stop) on the front panel for about five seconds. The disc tray
ejects automatically to indicate the Sound Demo mode is disabled.
Remedy
• Clean the disc and align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the number on the
player, the disc cannot be used (see DVD Video regions on page 42). In this
instance, the following message appears on screen: Incompatible disc region
number/Can't play disc.
• Allow time for any condensation inside the player to evaporate. Avoid using the
player near an air-conditioning unit.
• If the disc is loaded upside down, reload the disc with label side face up.
• Press  (stop), then  (play) to start playback again.
• Switch the power off once, then on again using the front panel
 STANDBY/ON button.
• When the power is cut, settings will be canceled.
• Check that connections are correct and that plugs are inserted fully.
• Check the manual of the TV/monitor to make sure the settings are correct.
• If the Progressive setting is selected and you have used component video cables
to connect a TV that is not compatible with a progressive scan signal, you will not
be able to see any picture at all. With your TV connected using either the
composite or S-video terminals, change the Component Out setting to Interlace
(see Video Output settings on page 30).
• The TV Screen setting is incorrect. Set the TV Screen option to match the TV/
monitor you're using (see Video Output settings on page 30).
• This system uses copy-protection technology which may prevent recording or
cause picture problems when connected through a VCR or AV selector. This is not
a malfunction.
• This player is compatible with Macro-Vision System copy guard. Some discs
include a copy prevention signal, and when this type of disc is played back, stripes
etc., may appear on some sections of the picture depending on the TV. This is not a
malfunction.
• Discs respond differently to particular player functions. This may result in the
screen becoming black for a brief instant or shaking slightly when the function is
executed. These problems are largely due to differences between discs and disc
content and are not malfunctions of this player.
• DVDs and CDs use different recording methods. This is not a malfunction.
10
45
En