4.
Press and hold the PAGE button on the cordless phone base. The In-Use LED flashes.
Release the button when the SD7505 Registration LED turns a solid green.
Registration is complete when the:
5.
Check for your SD7505 by pressing CONNECT TO on a cordless handset or the
cordless phone base, and scrolling through the list of available devices. Celldock-X (X
represents the alpha-numeric order in which the device was registered) should appear
in the list. If you do not see your SD7505, repeat steps 3 and 4.
NOTE: Celldock is a friendly default name used for the SD7505. You can change this name
to one of your choosing; see "Naming Your SD7505" on page 19.
8
•
Cordless phone base LED stops flashing, and the
•
SD7505 Registration LED turns off, after being solid green for
approximately 3 seconds.