Motorola C51 COMMUNICATION SYSTEM-SD7505 User Manual page 39

You tried to make a call through the SD7505, or configure the SD7505, but got the
message "Call Failed".
•
Make sure your SD7505 is connected to power. If it is connected to a mobile device,
the Bluetooth LED will blink every 3 seconds.
•
Try moving your SD7505 closer to your C51 cordless phone base, to make sure it has
a solid wireless link to the rest of your C51 system.
•
If neither of the above resolves the problem, try re-powering the SD7505. It is
possible that the wireless link between the SD7505 and C51 cordless phone base
may have been temporarily disrupted.
You wanted to make a call through the SD7505, but it dialed out on the Base Line
instead.
•
Your CONNECT TO the SD7505 may have timed out after 60 seconds of inactivity.
•
Consider changing your default line to the SD7505, if you want to make calls regularly
through the SD7505.
You get noise or static while on SD7505 calls.
•
Make sure you have good wireless coverage where your mobile device is located.
•
Trying moving your mobile device as close as possible to your SD7505. While
Bluetooth range can be up to 10m (33 ft) under ideal conditions, obstructions or
interference can reduce effective performance. Minimizing the distance between the
mobile device and SD7505 can reduce exposure to obstructions or interference.
29