Advertisement
Quick Links
Advertisement
Related Manuals for indusigns Mirco
Summary of Contents for indusigns Mirco
- Page 1 Design Mirror Mirco Installation Manual...
- Page 2 Contents Plug Screw Magnet Supplies - Pencil - Level Magnetic plate - Impact drill - Masonry drill Ø6mm - Screwdriver...
- Page 3 01| Determine position Mark the holes horizontally on the wall and pre-drill them with a Ø6mm drill bit.
- Page 4 02| Add plugs Place the supplied plugs in the pre-drilled holes and tap them carefully.
- Page 5 03| Attach steel to the Fix the steel to the wall with the supplied screws.
- Page 6 03| Add the magnets Place the mirror with the mirror side down on a soft surface and stick the magnetic plate about 1 cm from the edge. Then place the magnet on it.
- Page 7 04| Install mirror Carefully place the mirror with the magnet at the top in the slots. Then carefully press the mirror against the steel until the magnet “clicks” into place.
- Page 8 Thank you for your purchase! Have fun with your mirror Mirco...
Need help?
Do you have a question about the Mirco and is the answer not in the manual?
Questions and answers