Call Meters Menu Items; Call Metering - Motorola 8200 User Manual

Call Meters Menu Items

Call Meters
Show Last Call
Resettable Call Meters
Set Audible Call Timers
Show Meter During Calls
Set Meter Format
Set Call Cost Rates
Lifetime Meter
Show Total Calls
Show Home Calls
Show Roaming Calls
Reset All Meters
Single Alert Timer
On
Off
Repetitive Timer
On
Off
On
Off
Cost of Calls
Time of Calls
Set Home Rate
Set Roam Rate
Menu Navigation
O
M
MENU
C
Items shown in italics are available only
when Extended Menus are enabled.
M selects the Options menu

Call Metering

Your phone has an internal metering system which can be
used to provide you with individual and total call times or
costs.
The default setting for these meters is to show call time.
If you wish to display the cost of calls, you must set the 'Set
Call Cost Rates' option. This setting is then used to calculate
the call costs. There are two call cost rates, home and roam,
these are both required to calculate accurate costs.
The meter can be displayed during a phone call and audible
tones can be generated to indicate the passage of call time.
Depending on the model, your phone will monitor either all
A
calls or only outgoing calls.
Show Last Call
This option is used to display how long, or how much, the last
call was.
Once selected, the display will show
appropriate value.
The 'Set Meter Format' option is used to determine which call
value is shown. The rates in the 'Set Call Cost Rates' options
must be set if you wish to display the cost of a call.
Resettable Call Meters
The resettable call meters options are used to provide
information on the combined length, or approximate cost, of
calls made since the last meter reset. These meters can not be
reset individually, all three will be reset by the 'Reset All
Meters' option.
Using The Options Menu
or and the
Time Cost
49 English