Switching The Phone On And Off; Sim Card Removal - Motorola 8200 User Manual

Gsm cellular telephone
Table of Contents

Advertisement

If either of the
Bad Card See Supplier
Blocked See Supplier
you will need to contact your Cellular Service Provider.

SIM Card Removal

Push the release button towards the base of the phone and
pull the SIM card out. The SIM card can be removed at any
time, before or after the phone is switched off.
or
messages are displayed, then

Switching the Phone On and Off

To switch the phone on or off press the S key.
If you are switching the phone on and there is no SIM card
inserted, you will be asked to insert one. Once inserted, the
phone will check that the SIM card is valid.
Two security codes may be requested at this point:
the SIM card PIN code
the phone unlock code.
Entering Your SIM Card PIN Code
To enter the PIN code, press AO.
As you type in each digit of the PIN code a
displayed.
If you have made a mistake, pressing and releasing the C
key will remove the last digit. Holding the C key down will
remove the entire entry.
When the PIN code is complete press the O key.
If the PIN code entered is incorrect, the warning message
Wrong PIN
will be displayed, followed by
! If the PIN number is entered incorrectly three times in a
row, your phone will automatically lock-up and the
Blocked message will be displayed.
The code can be changed, see 'Change SIM PIN Code' in the
Options Menu section for more details.
Using Your Phone
*
character will be
Enter
PIN.
15
English

Advertisement

Table of Contents
loading

Table of Contents