ADVANCED INFORMATION
Programming of Rates
To display call meters, the home and the
roam rate must be programmed. The rates
can be entered in either currency per minute
or charge units per minute.
To programme the rates:
Security Code
Home Rate
Note: The roam rate initially defaults to the
home rate to prevent you from setting it to
zero by mistake.
Automatic Monitor Displays
This feature can be used to automatically
display the time or charge for a call during
and after each call (see note, CALL MONI-
TORING).
To enable/disable:
Select auto timer or auto meter
using the scroll keys.
to confirm the selection.
to toggle the function on/off.
Roam Rate
Page 41
2