Phone Programming - Motorola ic502 User Manual

To enable your security:
1.
After you are prompted to enable security, press OK
(right softkey).
2.
Press Yes (right softkey). A series of screens are
displayed.
e
3.
Press

Phone Programming

Within 24 hours of enabling security, you will receive an alert
notification containing your phone number, your Walkie-
Talkie number, your Talkgroups (if applicable), and the
Sprint Customer Service number.
To complete your phone programming:
1.
When you receive an alert notification saying New
Browser Message - Receive Programming Info, select Goto
(right softkey). You are prompted to accept changes to
your lists.
2.
Press OK (right softkey). You are prompted again to
accept changes to your lists.
3.
Press OK (right softkey). A confirmation is displayed.
4.
Press OK (right softkey).
e
5.
Press
Standby and Power Save Modes
Once your phone is on, it may display "Searching for Service,"
which indicates that your phone is searching for a signal.
When your phone finds a signal, it automatically enters
standby mode – the phone's idle state. At this point, you are
ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
to return to standby mode.
to return to standby mode.
Section 1B: Your Phone: The Basics 24