Fresh Food Refrigeration - JUNO JRG 90126 Manual

A. Light ON/OFF
B. Button ON/OFF
ON: Press the button (B). The pilot
light (A) switches on.
OFF: Keep pressed the button (B) until
the pilot light (A) and the
temperature indicator switches
off. (approx. 3 seconds).
C - E. Temperature
setting buttons
By pressing the button (C or E), the
current temperature setting flashes on
the indicator. It is possible to modify the
setting temperature only with flashing
indicator. To set a warmer temperature,
press button (C). To set a colder
temperature, press button (E). The
indicator displays the newly selected
temperature for a few seconds and
then shows again the inside
compartment temperature.
The newly selected temperature
must be reached after 24 hours.
Attention!
During the stability period and when
first starting the appliance the
temperature displayed does not
correspond to the setting temperature.
During this time it is possible that the
temperature displayed is lower than the
setting temperature.
D. Temperature indicator
During normal functioning the
indicator shows the temperature inside
the fridge.
Attention!
A difference between the
temperature displayed and the
temperature setting is normal. Especially
when:
- a new setting has recently been
selected
- the door has been left open for a
long time
- warm food has been placed in the
compartment
F. Super cooling pilot light
G. Super cooling button
The maximum performance is
obtained by setting the supercooling
function. It's recommended when
loading large quantities of food.
Press the supercooling button (G).The
relevant pilot light (F) switches on.
After about 6 hours the supercooling
function switches off automatically.

Fresh food refrigeration

To obtain the best performance:
• do not store warm food or
evaporating liquids in the
refrigerator;
• do cover or wrap the food,
particularly if it has a strong flavour.
• Position food so that air can circulate
freely round it.
electrolux 27