curt 60698 Installation Manual

INSTALLATION MANUAL
Level of Difficulty
Easy
Weight Capacity
Gross trailer weight (GTW)
Vertical load
Parts List
Item Qty Description
1 2 Safety chain anchor
2 2 Pin, 12mm
3 2 Lynch pin, 5mm
2
1
3
Tools Required
None
Maintenance
When the anchors are not in use, remove
them and store in a dry, clean area.
Keep the safety chain anchor pins
and towing system lubricated regularly.
Use silicone spray or equivalent
to prevent wear and rust.
Place the puck system anchor hole covers
(supplied by the truck manufacturer) into
the puck system holes when the anchors
are removed to keep dirt and debris out.
Failure to maintain the towing system could
result in poor performance and / or failure.
CURTMFG.COM
• NEED ASSISTANCE?
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity.
Vehicle performance (braking, handling, acceleration, turning radius) can be drastically affected
by a trailer. Allow additional time and space for stopping, changing lanes, passing and turning.
38,000 lbs.
Product Photo
9,500 lbs.
CAUTION
Severe bumps can damage the towing system. Avoid or drive slowly over rough terrain.
Do not tow more than one trailer at a time. This may cause loss of control.
NOTICE
Before you begin installation, read all instructions thoroughly.
Product Registration and Warranty
CURT Group stands behind our products with industry-leading warranties.
Provide feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys
• 877.287.8634 • 60698-INS-RB • PAGE 1
60698