curt 60629 Installation Instructions

INSTALLATION INSTRUCTIONS
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
CHEVROLET / GMC
OEM-COMPATIBLE
GOOSENECK BALL
WARNINGS
Vehicle performance (braking, handling, acceleration,
turning radius) can be drastically affected by a trailer.
Allow additional time and space for stopping,
changing lanes, passing and turning.
Do not tow more than one trailer at a time.
This may cause loss of control.
Severe bumps can damage the towing system.
Avoid or drive slowly over rough terrain.
WARNING: Periodically check the gooseneck hitch
to ensure all fasteners are tight and that all structural
components are sound.
OPERATION
Step 1
To install the 60629 gooseneck ball, lift the handle from
its seat and rotate 90°. Insert the gooseneck ball into the
receiver tube in the bed of truck. Rotate the handle to the
locked position and flip it down into its seat. See figure 1.
Note: If handle does not freely rotate into the locked
position, rotate the ball while applying light pressure to the
side of the handle. When the handle rotates into the locked
position flip it down into the seated position.
Step 2
When the gooseneck ball is not in use, remove it from the
receiver tube and store it in the case, in a dry, clean area.
Step 3
Place the rubber cover (66155) in gooseneck receiver
when the ball is removed to keep dirt and contaminates out.
Unlocked
Locked
60629
Figure 2
PAGE 1 • 60629-INS-RA • 1.877.287.8634 • NEED ASSISTANCE?
Handle
Rotated 90°
Handle must match
the ball profile while
Seat
in the locked position,
prior to coupling
Locked
Figure 1
• CURTMFG.COM
Truck bed
Receiver tube