Table of Contents
Advertisement
Quick Links
Instructions for Installation and Operation
Filtered PWM Speed Control for
Permanent Magnet DC Motors
Model 0794 Speed and Direction Control
up to 5/8 HP NEMA-1/IP-20
Specifications
Product Type: .................................................................................. WPM-2148E1
....................................................................................
Input Voltage:
.................................................................................
Output Voltage:
www.bodine-electric.com
115 VAC +/-10%, 50/60 Hz,
Single Phase
Adjustable, 0 to 130 VDC
07401107.D
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bodine QUALITY MOTION WPM-2148E1
Summary of Contents for Bodine QUALITY MOTION WPM-2148E1
- Page 1 Permanent Magnet DC Motors Model 0794 Speed and Direction Control up to 5/8 HP NEMA-1/IP-20 Specifications Product Type: .................. WPM-2148E1 ..................Input Voltage: 115 VAC +/-10%, 50/60 Hz, Single Phase ................. Output Voltage: Adjustable, 0 to 130 VDC www.bodine-electric.com 07401107.D...
- Page 2 This manual contains the basic information needed to install and operate Bodine Model 0794 DC Speed Control. This manual does not profess to cover all details or variations in equipment, or to provide for every possible contingency associated with installation, operation, or maintenance. No warranty of fitness for purpose is expressed or implied.
-
Page 3: Table Of Contents
Figure 2–Control Electrical Connections ........7 RoHS COMPLIANT © 2024 Bodine Electric Company. All rights Reserved. All data subject to change without notice. Printed in U.S.A. www.bodine-electric.com... -
Page 4: Specifications
SPECIFICATIONS ABOUT THIS PRODUCT–The Bodine Model 0794 speed control is designed to provide variable speed control of standard permanent magnet DC motors. Adjustable acceleration and deceleration are provided, making the drive suitable for soft start applications. The full-featured drive is easy to install and operate. -
Page 5: Step 1-Mounting The Control
7.116 REF. 5.116 REF. 1.00 TYP. [4] .28 I.D. HOLE .38 TYP. .38 TYP. 1.00 TYP. .38 TYP. .12 R. TYP. .38 TYP. COVER ATTACHMENT SCREWS .109/.108 4.65 REF. .50 R. [2] PLS. 4.626 5.563 Figure 1–Control mounting dimensions www.bodine-electric.com... -
Page 6: Step 2-Preliminary Setup
Set switches 1 through 6 to match the type, speed, and current ratings on the motor nameplate per Table 2. Table 2–Setup of DIP Switches 1 through 6 Motor Ratings Control Setup Typical Current Range Typical Input Bodine Rated Armature Rated Motor of TORQ. Current at Max. Motor... -
Page 7: Step 3-Electrical Connections
Fuse for 1.2x motor rating MOTOR To 115 VAC line User-supplied cable to motor (factory-installed) connects with set screws FIGURE 2 – Control shown with cover removed to identify locations of electrical connections, DIP switches, trim pots, and diagnostic lights (LEDs). www.bodine-electric.com... -
Page 8: Operation
4. Check all rotating members. Be sure keys, pulleys, etc. are securely fastened and safety guards are in place. 5. Check for proper mounting and alignment of products, and verify safe loading on shafts and gears. www.bodine-electric.com... -
Page 9: Step 5 -Operating The Control
60% of its full speed. The factory setting is for 130V motors. TORQUE LIMIT–Turn the TORQ pot counterclockwise to reduce the peak torque capability of the motor. Most Bodine motors will produce about 200% of rated torque with the horsepower switches set per Table 2 and with the TORQ pot turned fully clockwise. -
Page 10: Step 7: Using The Forward-Brake-Reverse Switch
SPEED REGULATION–The REG pot sets the gain of the IR compensation. It is factory-set so that the speed of most Bodine motors varies no more than 2% from no load to full load at full speed when the horsepower switches are set per Table 2. -
Page 11: Troubleshooting
Bodine. This warranty is in lieu of any other expressed or implied warranty - including (but not limited to) any implied warranties of merchantability and/or fitness for a particular use or purpose. - Page 12 Visit www.bodine-electric.com for all your motion control needs. Bodine offers the widest selection of variable-speed AC, permanent magnet DC and brushless DC fractional horsepower gearmotors and motors in the industry. For complete specifications, 3D CAD drawings, or to order online, visit bodine-electric.com.
Need help?
Do you have a question about the QUALITY MOTION WPM-2148E1 and is the answer not in the manual?
Questions and answers