Page 2
It’s soon time to go out riding! v. 1.0.1...
Page 3
Welcome to Awake! Read this guide, and you’ll be good to go!
Page 4
Welcome You are now part of the Awake-movement! At Awake, it is not about making just another watersports product. Awake is much more than that. We are energetic, adventurous and commited thrill seekers, and we want to pass our passion on. Through technology...
User manual Warranty card * The inventory list covers one (1) standard Awake VINGA package. If you’ve added additional accessories, such as board bag kit, impact vest, extra wings etc., these will also be included in the box. Extra batteries and their hand controllers are shipped separately.
Page 7
Electric hydrofoil that elevates the board with the help of wings. Allows the rider to “fly” above the surface. Flex BP: Flex BP is the abbreviation of Awake’s battery – ’Battery Pack’ and works with all Awake watercraft models. XR is short for ’Extended Range’, and is used to define Awake’s larger battery.
Page 8
VINGA eFoil The VINGA is designed for a safe and easy user experience. Flex BP Board Drive Unit Jet system Connector Module Stabilizer Wing Powder Wing...
Page 9
Welcome to Awake! Click-To-Ride Connect the Board to the Drive Unit using the Click-To-Ride system. Grab the board, orient it to that the nose of the board is pointing in the direction of the powder wing and approach the drive unit.
Page 10
Wings and Spacers The Powder Wing (Front) and the Stabilizer Wing (rear) are attached to the Drive Unit with standard screws, two [2] for the Stab. Wing and three [3] for the Powder Wing. The angle of the Wings can be fine tuned with Spacers to maximize your riding experience.
Page 11
(2) spacers for your front wing and two (2) different spacers for your Stabilizer Wing. See the Awake team recommendations below: Front wing spacer Stab. wing spacer Spacer classification VINGA PERFORMANCE SET - Better glide, agility and control Powder 1800 and 1350 Spacer Front Wing Stab. Wing...
Page 12
Travel the world with your eFoil and keep your equipment organized with the VINGA Board Bag. The VINGA board bag consist of two different bags, one for the Board and one for the Drive Unit, Wings and accessories. They can be connected to each other, carried separately in shoulder straps or rolled with the included Wheel Set.
Page 13
Welcome to Awake! The Drive Unit bag have a special slot designed to hold the Drive Unit when installing the Wings. This gives stability and ensures that the Connector Module Pins do not get scratched or wet. The Tool Bag inside the Drive Unit Bag contains a H4 Hex Tool (allen key) and Ted Gel (Anti corrosion), but have ample space for more tools if required.
Page 14
QR-code below and make sure that bluetooth is activated on you smartphone. 2. Activate the Flex BP with a PKL and open the Awake app. Stay close to the battery pack you want to connect too and choose your battery from the list. When connected, the LEDs on you Flex BP will turn blue.
Page 15
Welcome to Awake! Welcome to Awake! AWAKE APP...
Page 16
Awake Flex Hand Controller (HC) The Awake Flex HC is the wireless device that controls the speed of your board. It can be paired to any Flex BP and is charged by the Awake Flex Hand Controller Charger. Display Throttle button...
Page 17
Pairing the Flex HC to the Flex BP 1. Connect to the Flex BP and open the QR-reader in the Awake App. 2. Scan the QR-code on the Flex HC display. 3. The Flex BP will “beep” when the Flex HC is paired correctly.
Page 18
Awake Flex Battery Pack (BP) The Awake Flex BP is the energy source of your VINGA eFoil. There are two different capacity sizes to choose from, the Standard Range (SR) and the Extended Range (XR). Regardless of capacity size, all Flex BPs fit into all Awake Boards, RÄVIK and VINGA alike.
Page 19
Welcome to Awake! Charging the Flex BP Charging times: SR ~1,5h / XR ~2h 1. Plug in the Flex Charger to a power outlet. 2. Grab and lift the Flex BP with the Handle and the locking handle. 3. Carefully place the Flex BP on...
HC and check the BP state of charge. 3. Install the Wings The Awake Wings are attached to the bottom part of the Drive Unit, where the jet is located and consist of the Powder Wing (big one) and the Rear Wing (small one).
Page 21
BP. See page 11 for pairing instructions. Go ride! 1. Start by moving the VINGA out to a depth of at least 1.5m to avoid damaging the Drive Unit and the Wings. Lie down on the board on your belly and gently accelerate with the Flex HC.
Flex BP for longer than a month, the Flex BP should be kept at a charge of 80%. Make sure to check in on the Flex BP’s via the Awake App continuously to see charge status. 3. Let all the parts dry properly Air dry or use a towel.
Page 25
Welcome to Awake! [NOTICE]: NEVER do any of the following: 1. Never connect or disconnect the Flex BP to the board in the water. It’s important that the male connector found in the Flex BP compartment of the board, and the female connector found on the Flex BP are always dry when connecting.
Stay up-to-date with offers, news and tips. Explore all Awake products and subscribe to our newsletter by scanning the QR-code See you out there! If you experience any issues with your Awake products please contact Awake Support through the Awake app or support@awakeboards.com.
Page 32
Be sure to follow us at on Instagram (@awakeboards) for inspiration on adventures to take your Awake Board on, and share your rides with us at #rideawake awakeboards.com/stayawake Stay Awake...
Need help?
Do you have a question about the VINGA and is the answer not in the manual?
Questions and answers