Advertisement
Quick Links
Except for Korea and Taiwan
®
Versant
3100i Press
Setup Manual
Before using the machine, please read this manual thoroughly. Be sure to keep this manual for future reference.
- This manual may not be edited, modified or copied in whole or part without the written consent of the publisher.
- Parts of this manual is subject to change without prior notice.
- The screen shots and the illustrations in this manual are used as examples. They may differ from yours depending on the model, the software, or
the OS.
PDF Manuals
The PDF manual is available by clicking "PDF Manuals" on the
help of CentreWare Internet Services.
http://product2.fujixerox.co.jp/ews_help/ap/iso88591/versant_3100i/top.
html
DE6709E2-1 September 2020 Edition 1
©Fuji Xerox Co., Ltd. All rights reserved.
Power On/Off
The printer warms up and becomes ready to print within about
5 minutes after powered on.
Switch the power off at the end of a day or if the machine is
not used for a long time.
Note
● The warm-up time may vary with an initial temperature of the printer.
● After being inactive for a while, the printer automatically enters the
Power Saver mode to reduce power consumption.
◇ Powering On
1.
Press the power switch on the printer unit.
User interface will be powered on.
Note
When powered on, the printer immediately gets started to proceed with
image quality adjustment, but it takes some time before the printer
becomes ready to print.
When the printer becomes ready to print (i.e. enters the Standby
mode), the message changes to "Ready to Print."
970E 68640
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Fuji Xerox Versant 3100i Press
Summary of Contents for Fuji Xerox Versant 3100i Press
- Page 1 ® Versant 3100i Press DE6709E2-1 September 2020 Edition 1 ©Fuji Xerox Co., Ltd. All rights reserved. Setup Manual 970E 68640 Before using the machine, please read this manual thoroughly. Be sure to keep this manual for future reference. - This manual may not be edited, modified or copied in whole or part without the written consent of the publisher.
- Page 2 Power on your Print Server to start the Print ◇ Main Power Switch Server. If you turn off the main power, the power consumption can be reduced. (but cannot be reduced to zero.) Refer Note that the machine needs more time to warm up if For information on functions and operations of the Print Server, refer to switched on after the main power is off.
- Page 3 1,300 Fuji Xerox. The power cord is exclusive use for this product. Do not use it for any other product. Do not damage or alter the power cord. Damage and alteration may generate heat and eventually cause electric (Unit: mm) shock or a fire accident.
- Page 4 Otherwise, it may cause injuries or burns. Switch A circuit breaker, fuse or any other safety device becomes activated. off the product immediately and contact your local Fuji Xerox Any liquid is spilled into the product. representative.
Need help?
Do you have a question about the Versant 3100i Press and is the answer not in the manual?
Questions and answers