Fagor FAS 3612 Manual page 18

STARTING UP AND
6
CHLD SAFETY LOCK FUNCTION
Start/pause button
a To start up the washing machine you
must press the start/pause button. The
minutes remaining until the end of
washing and drying will appear on the
display at all times.
CHLD SAFETY LOCK FUNCTION
Lock function selection
The lock function ensures that the program
will not be interrupted if any buttons are
pressed.
The block function should be activated after
the wash program and additional options have
been selected.
Activating the lock function
a The lock function can be activated by
pressing the start/pause button and
holding it down for at least 3 seconds.
The display will show if it is activated.
Deactivating the lock function
b The lock function is cancelled when the
wash programme comes to an end. If
you want to deactivate the block function
before the end of the programme, you
have to hold the start button down again
for at least 3 seconds. After 3 seconds,
the block function indicator will disappear
from the display, and it will go into pause
status.
The ON/OFF button does not cancel
the block function.
STARTING UP
using the appliance
a
a
b
18
Select
Select
Select