Patpet W1 Manual

Terms of Use and Limitation of Liability
1.Terms of Use
Use of this product is subject to your acceptance without modification of the terms,
conditions and notices contained herein.Use of this product Implies acceptance of all
such terms,conditions and notices.If you do not wish to accept these terms,
conditions,and notices,do not use this product.
2.Proper Use
If you are unsure whether this is appropriate for your cat,please consult your
veterinarian or certified trainer,contact our customer care center.
3.No Unlawful or Prohibited Use
This product is designed for use with cats only.This Pet training device is not
intended to harm,injure or provoke.Using this Product in a way that is not Intended
could result in violation of Federal,State or local laws.
W1
Laser Light/Cat toy
IMPORTANT SAFETY INFORMATION
CAUTION,used with the safety alert symbol,indicates a hazardous situation
WARNING
which,if not avoided,could result in minor or moderate injury.
CAUTION CAUTION,used without the safety alert symbol,Indicates a hazardous
situation which,if not avoided,could result in harm to your pet.
CAUTION NOTICE,is used to address safe use practices not related to personal injury.
LASER RADIATION.Risk of exposure.
CAUTION
Laser radiation is emitted from this product.Please read all safety labels
affixed to the product.
Do not look into the laser beam or the laser beam reflection.
Do not aim the laser beam at a person.
Avoid direct eye contact with the laser beam.if exposed,close eyes
immediately and divert eyes away from laser beam.
Changes to the laser equipment are,not permitted.
Follow the instructions provided in the operating guide.Use of controls or
adjustments or performance
of procedures other than those Specified here
in may result in hazardous radiation exposure.
Keep away from children.
Not intended as a Toy for children.
Do not allow small children to use this product to play with your pet
without adult supervision.
CAUTION Do not aim the laser beam directly into the eyes of a pet.
Supervise pet while playing with this product.
If you notice your per exhibiting unusual behaviour,immediately
discontinue use of product.
Consult with a veterinarian before resuming use of product.
Do not place the toy on any surface other than a flat,level floor.
NOTICE Inspect this product periodically for damage and discard product
immediately if it appears worn or broken.
Do not mix old and new batteries.
Do not mix standard,alkaline or rechargeable batteries.
Do not use rechargeable batteries.
Exhausted batteries should be removed immediately.Do not dispose of
batteries with Household waste.
USB power supply must be 5V voltage.
These instructions must be retaining and passed on with owner shop.
Toy Assembly
No assembly is required Simply install batteries or connect to USB power supply(5V
voltage),press power button and place the Toy on the floor to use.
Customer Care
please contact your local retailer or distributor with any set-up or technical difficulties.
Connect to USB Power Supply
Access 5V voltage USB power supply.
Battery Installation
1.Open the battery door which is located on
the bottom of the toy.
2.Insert 4 AA batteries into the battery
compartment.
3.Close the battery door.
Operating Instructions
Automatic Mode
.Press power button to turn on the toy.
.Set on safe,flat surface such as table.
.In working state,press power button to turn
off the toy.
Manual Mode
.Press the power button three times to start
.Hold the toy in your hand and aim it
wherever you like to create your own laser
patterns.
.The toy will automatically turn off after 15
minutes.
.In working state,press power button to turn
the toy off.
In Automatic or Manual Mode,you can adjust
the mirror to aim the laser across a variety of
surfaces.
Automatic Timer
The toys will automatically shut down and go
to sleep after working for 15 minutes.After 1.5
hours,the toys will turn on and work for 15
minutes by themselves,and so on.
Press the power button to start the toy in the
dormant state.
Press the power button to close the toy in the
working state.