Page 1
User Manual 600 Yards Rechargeable Remote Training Collar Model Number: T600...
Page 2
Important Safety Information Not for use with aggressive dogs. • Never connect a lead to the electronic collar; it will cause Do not use this Product if your dog is aggressive, or if your dog is prone excessive pressure on the contacts. to aggressive behavior.
MAIN FEATURES ①.LCD Screen: 1. Brand-new Signal Wake-up Technology, battery work time up to 90 The LCD Screen will display different modes of the collar and the different Days. 2. Pioneering Design with separated adjustable Tone level. channels for two collar receivers as well as battery indication. 3.
Page 4
HOW TO USE 6.Connect transmitter and receiver 1) With the Receiver Collar off your pet, turn on the receiver collar. 2) Press the power button of receiver once again, the red light will Note: Please charge before using the product! always on.
Page 5
How to Connect transmitter and receiver: 1.Turn on the transmitter 3.Press the the “power” button once again, the red light will always on. 2.Turn on the receiver Note: 1)If the pairing were not successful, please repeat the 1 4.Press the TONE, VIBRA or Static Stimulation(any of them) on -4 steps.
Important Notice: Frequently Asked Questions 1. The display of transmitter stays on for approximate 6 seconds after a button press.After 6 seconds with no button press,the Q:Is the Vibration/Stimulationsafe for my pet? blue backlight shuts off first, and if no button press with another A: While the Vibration/Stimulation is unpleasant, it is harmless to 50 seconds,the display shuts off and the transmitter goes into your pet.
(3) During the first initial training sessions, keep the dog in a Common size of different dogs familiar outdoor environment. Training in a place that the dog is not familiar with may make the dog become distracted. Chest Back (4) Use a long leash fastened to a non-metallic collar to help the Size Neck Measureme...
FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the T600 and is the answer not in the manual?
Questions and answers