Advertisement
Quick Links
Advertisement
Related Manuals for AEG A18SAG125
Summary of Contents for AEG A18SAG125
- Page 1 A18SAG125 Original instructions...
- Page 2 Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
- Page 3 Battery Handle, insulated gripping surface Auxiliary handle, insulated gripping surface Spindle lock button Paddle switch Toolless grinding guard Guard lever lock Grinding wheel Lock-out switch Backing flange Easy fix nut Cutting disc Sanding disc Wrench Toolless cutting guard p. 5 p.
- Page 4 Remove the battery pack before starting any work on the product. 75-100 % 50-75 % 25-50 % 0-25 %...
- Page 6 ° ° ° ° °...
- Page 7 < 6 mm 15°...
- Page 8 < 1.2 mm...
- Page 10 START STOP START STOP...
-
Page 11: Technical Data
TECHNICAL DATA A18SAG125 Type Cordless angle grinder Battery voltage 18 V Rated speed 9200 min Grinding disc diameter max. 125 mm Grinding disc hole diameter 22.2 mm Grinding disc thickness min./max. 6 mm Grinding surface diameter max. 125 mm Cutting disc thickness min./max. - Page 12 Regularly clean the power tool’s air vents. The motor’s fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards. Use AEG 18V battery and charger only Do not operate the power tool near flammable materials. WARNING! Read all safety warnings, instructions, Sparks could ignite these materials.
- Page 13 ADDITIONAL SAFETY WARNINGS SPECIFIC FOR CUTTING- rooms. Keep dry at all times. OFF OPERATIONS Use only AEG chargers for charging AEG battery packs. Do not Do not “jam” the cut-off wheel or apply excessive pressure. use battery packs from other systems.
-
Page 14: Maintenance
For an optimum life-time, the battery packs have to be fully components need to be replaced which have not been described, charged, after used. please contact one of our AEG service agents (see our list of To obtain the longest possible battery life remove the battery pack guarantee/service addresses). - Page 15 Wear a suitable dust protection mask. Wear protective gloves. Always operate with two hands. Do not use the guard for cut-off operations. Not for wet grinding. Using water or other liquid coolants may result in electrocution or shock. Do not use chipped, cracked or defective grinding wheel.
- Page 16 Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC, 3149, Australia AEG is a registered trade mark used under license from AB Electrolux (publ). Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand...
Need help?
Do you have a question about the A18SAG125 and is the answer not in the manual?
Questions and answers