Slide the first intermediate panel into the lowest re-
1.
tainer
and fit it at the top.
Note: The intermediate panel is automatically posi-
2.
tioned by the rotational movement of the spacer.
Slide the second intermediate panel into the central
retainer
and fit it at the top.
Close the metal strip on the left and right
3.
Shelf supports
18 Shelf supports
To clean the rails and the cooking compartment, or to
replace the rails, you can remove these.
Note: The lettering "Pyro" must be legible at the top,
4.
as shown in the picture.
Slide the inner panel into the retainer at the bottom
and fit it at the top.
Push the inner panel in at the top
5.
ing caps
.
Open the appliance door fully.
6.
Close the locking levers on the left- and right-hand
7.
hinges
Close the appliance door.
8.
Note: Do not use the cooking compartment again until
the door panes have been correctly fitted.
18.1 Detaching the shelf supports
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Lift the rail forwards slightly
1.
Shelf supports en
downwards in the direction of the arrow.
and detach it
. Push the slid-
.
23
Need help?
Do you have a question about the HQA 74B 3 Series and is the answer not in the manual?