Checking The Sat Radio Id Number; Storing Channel Presets; Receiving Stored Channels; Storing The Desired Sports Team (Sirius Only) - Alpine CDA-9887 Owner's Manual

4
Press or to select the desired channel.
Holding down or
continuously.
• When using the optional remote control (RUE-4190, etc.), an SAT
Radio Channel can be directly called up with the numeric keypad of
the remote control.
1 While in XM or SIRIUS Radio mode, enter the Channel
number you want to call up with the numeric keypad on
the remote control.
2 Press ENTER on the remote control within 5 seconds to
receive the Channel.
If the channel number is 3 digits, the Channel is
automatically received after the channel number has
been input.

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this number.
This number is an 8 character (for XM Radio) or 12 character (for
SIRIUS Radio) alphanumeric number. It is printed on a label found on
the SAT Receiver.
It can also be displayed on the screen of this unit in the following way.
XM:
1
While receiving a SAT Radio band, press
to select channel "0" for XM.
The unit displays channel No. "0" for 2 seconds, then
displays the ID number.
While displaying Radio ID as shown above, Demonstration
(page 23) become nonfunctional.
2
To cancel the ID number display, select the channel
other than "0".
SIRIUS:
1
While receiving a SAT Radio band, press
to select channel "255" for SIRIUS.
2
Press TITLE until the ID No. appears in the display.
Category Name
Channel No./Channel Name
*
Composer Name
ID No.
(Blank)
(Blank)
3
To cancel the ID number display, set the channel to
other than "255".
• You cannot use "O", "S", "I", or "F" for the ID Number (XM radio
Receiver only).
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
* When the Scroll Setting (page 24) is set to "Auto", the display cannot
be switched by pressing TITLE. The display contents switch
alternately.
26
-EN
will change channels
or
or
*
ID No.
ID No.
Channel No./Channel Name
Calendar/Clock
Category Name
Channel No./Channel Name

Storing Channel Presets

1
Press BAND to select the desired band you want to
store.
2
After tuning in the desired channel, press and hold,
for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to store
the channel.
The selected station is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
• To use this procedure for other bands, simply select the band desired
and repeat the procedure.
• A total of 18 channels can be stored in the preset memory (6 channels
for each band; XM1, XM2 and XM3 or SIRIUS1, SIRIUS2 and
SIRIUS3).
• If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.

Receiving Stored Channels

1
Press BAND to select the desired band.
2
Press the channel preset buttons that has your
desired satellite channel in memory.

Storing the desired Sports Team (SIRIUS only)

Store a favorite team from one of the available leagues SIRIUS covers.
Once stored, game times and scores for that team are announced using
the interruption ALERT display while receiving other programming. To
receive these announcements, refer to page 27.
This function becomes effective after performing the following two
operations.

Storing while receiving a game broadcast

1
Select the channel broadcasting your favorite team's
game.
2
Press FUNC./SETUP to activate the function mode.
3
Press 1(M) to activate the Memory mode.
4
Turn the Rotary encoder to select the desired
team for the game being broadcast, and then press
/ /ENT.
5
Turn the Rotary encoder to select an interruption
type, and then press
Alert Type Initial (Initial setting)
Initial: The ALERT display interrupts when the
game begins.
Update: The ALERT display interrupts by game
progress (change of score, game result,
etc.).
/ /ENT.
Update