Advanced Menu; Advanced Chipset Control (Advanced Menu); I/O Device Configuration (Advanced Menu); Reset Configuration Data (Advanced Menu) - Alienware Aurora mALX User Manual

Alienware Aurora mALX Technical Reference

Advanced Menu

Figure 5 - 3 Advanced Menu

Advanced Chipset Control (Advanced Menu)

Pressing Enter here will access the sub-menu which allows you to disable the audio
and modem devices if required; and you can also Enable/Disable the RAID function
from this menu.

I/O Device Configuration (Advanced Menu)

The sub-menus under this item allow you to enable/disable the Serial port A (Serial
Mouse), and FIR (Infrared) transceiver.

Reset Configuration Data (Advanced Menu)

This item is set to No as default. You can change the setting to Yes if you have
in¬stalled a new add-on which has reconfigured the system, resulting in such a
serious system conflict that the operating system is unable to boot.

Power On Boot Beep (Advanced Menu)

Use this menu to enable/disable the single beep sound at the end of the POST. This
item is "Disabled" by default.

Battery Low Alarm Beep: (Advanced Menu)

Use this menu item to enable/disable the battery low alarm beep.
6