Connections - Aiwa XP-SP1000 Operating Instructions Manual

CONNECTIONS
mm
Using headphones +(3
Remove the rubber capandconnect the supplied
headphones to
the PHONES jack on the unit.
When connecting or disconnecting the headphones,
be sure to turn off the power.
"L" is for the left ear, "R" is for right.
Before connection
This unit can be connected to a home audio.
Turn off this unit and units to reconnected.
insert all plugs firmly. Loose connections can cause
noise or result in equipment damage.
When disconnecting cords, always grasp the plug,
not the cord. Pulling onthecord can break the wires
inside, causing a short circuit.
DO NOTconnect theoutput terminals of the CD
player to the PHONO inputs of an amplifier (with a
phonoequalizer-amplifier builtin).
lf the image distorts on a television (or noise is heard
from a radio) near the CD player during playback,
move it farther away from the affected devices.
Adjust the volume and DSL using the VOL _k/—
buttons and the DSL switch on the CD player.
Connecting to an audio system+@
Use a commercially available connection cord which
has a 3.50 stereo mini-plug at one end and two
phono plugs at the other end. Insert the phono plugs
into the right (R) and left (L) analog input terminals
(CD IN or AUX input) of the system. Then, insert the
stereo mini-plug into the PHONES jack on the unit.