Guardian PRO 7160V Owner's Manual
  1. Manuals
  2. Brands
  3. Guardian Manuals
  4. Garage Door Opener
  5. PRO 7160V
  6. Owner's manual

Guardian PRO 7160V Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WARNING:
To reduce the risk of injury to persons - Use this
operator only with Residential Sectional Garage
doors.
WARNING:
To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors.
Owner's Manual
Owner's Manual
Please read and understand this manual and safety instructions carefully before installation.
• Please read and understand this manual and safety instructions carefully before installation.
The Opener WILL NOT CLOSE until the Photo Eye Safety System is properly installed and aligned.
• The Opener WILL NOT CLOSE until the Photo Eye Safety System is properly installed and aligned.
• REGULARLY CHECK and TEST the Opener according to the safety label to ENSURE SAFE OPERATION.
REGULARLY CHECK and TEST the Opener according to the safety label to ENSURE SAFE OPERATION.
• If using the unattended operation feature, use ONLY with sectional doors.
Retain this manual for future reference.
• Retain this manual for future reference.
• *In California: To be in compliance with CA SB-969, this operator must be installed with the backup battery kit, STDBBUKIT.
Serial # __ __ __ __ __ __ __
Serial # __ __ __ __ __ __ __
Located on label on top of your opener.
Located on the label on top of your opener.
The illustrations used in this instruction manual may differ from the actual product you have purchased.
GDO Manual Revised: 05-24
Date Installed __ __ /__ __ /__ __ __ __
Date Installed __ __ /__ __ /__ __ __ __
MODEL 7160V
PRO Series
Works with the beam
Smart Controller
Chain Or Belt
Drive
GDOMU15A-11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO 7160V and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Guardian PRO 7160V

Summary of Contents for Guardian PRO 7160V

  • Page 1 MODEL 7160V WARNING: To reduce the risk of injury to persons - Use this PRO Series operator only with Residential Sectional Garage doors. WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors. Works with the beam Smart Controller Chain Or Belt...

  • Page 2: Table Of Contents

    Table of Contents Inventory Symbols and Icons Inventory and Hardware Needed Safety Instructions Prepare / Sectional Garage Door / Tools Required Assembly Assembling T-rail to Operator / Tension the Belt and Chain (Optional) Installation Mounting Header Bracket Attaching Rail to Header Bracket and Door Bracket Mounting Opener to Ceiling Attaching Door Arms Installing Light and Emergency Release Handle...

  • Page 3: Inventory

    Inventory 1. Opener Unit + Light Lens (Light bulb is not included) 2. Remote Control 3. Deluxe Door Control Console 4. Emergency Release Handle 5. Manual 6. Photo Eyes 7. Door Bracket 8. Header Bracket 9. Door Arms MODEL 7160V PRO SERIES Hardware Needed INSTALLATION HARDWARE, LOCATED IN HARDWARE BAG* (SHOW ACTUAL SIZE 1:1)

  • Page 4: Safety Instructions

    Safety Instructions IMPORTANT INSTALLATION INSTRUCTIONS WARNING o reduce the risk of severe injury or death: 1. READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS. 2. Install only on a properly balanced garage door. An improperly balanced door has the potential to inflict severe injury. Have a qualified service person make repairs to cables, spring assemblies, and other hardware before installing the opener.

  • Page 5: Prepare / Sectional Garage Door / Tools Required

    Preparation WARNING To prevent SERIOUS INJURY or DEATH: - Before beginning installation of the Opener please complete the following test to ensure that your door is balanced and in good working condition. - A poorly balanced door can cause serious injury and damage to the Opener. - Always have a qualified garage door service technician make any required adjustments and / or repairs to your door before proceeding with installation.

  • Page 6: Assembling T-Rail To Operator / Tension The Belt And Chain (Optional)

    Assembling T-rail WARNING To prevent SERIOUS INJURY: - DO NOT connect power until instructed. - Keep hands and fingers clear from sprocket during operation. - Wear gloves when installing chain / belt and cable. - Keep hands and fingers away from joints and possible sharp edges. To Assemble the Rail 1.

  • Page 7: Mounting Header Bracket

    Mounting Header Bracket WARNING To prevent SERIOUS INJURY: - DO NOT connect power until instructed. - The Header Bracket MUST be SECURELY fastened to the structural support on the mounting wall or ceiling, otherwise the door may not reverse when required. DO NOT install the Header Bracket over drywall.

  • Page 8: Attaching Rail To Header Bracket And Door Bracket

    Attaching Rail to Header Bracket and Door Bracket CAUTION To prevent SERIOUS INJURY: - DO NOT connect power until instructed. - Horizontal and vertical REINFORCEMENT is recommended for the top panel of fiberglass, aluminum or light weight steel garage doors BEFORE installing the door Bracket. Contact your door manufacturer for door strut and vertical reinforcement options.

  • Page 9: Mounting Opener To Ceiling

    Mounting Opener to Ceiling WARNING To prevent SERIOUS INJURY or DEATH: - DO NOT connect power until instructed. - Install the Opener at least 7 feet (2.13m) above the floor. - Fasten the Opener SECURELY to STRUCTURAL SUPPORTS of the garage to prevent falling. - If installing Brackets to masonry, concrete anchors (not provided) MUST be used.

  • Page 10: Attaching Door Arms

    Attaching Door Arms WARNING To prevent SERIOUS INJURY: - DO NOT connect power until instructed. - Keep hands and fingers away from the sprocket during operation. - Wear gloves when installing chain/belt and cable. - Keep hands and fingers away from joints and possible sharp edges. To Connect Door Arm 1.

  • Page 11: Installing Light And Emergency Release Handle

    Installing Light WARNING To prevent SERIOUS INJURY or DEATH from electrocution: - Disconnect power cord before installing / replacing light bulb. To prevent possible OVERHEATING or damage to Opener: - Use ONLY A19 (E26) incandescent bulbs (100W max.). - DO NOT use short neck or specialty light bulbs. - DO NOT use halogen bulbs 1.

  • Page 12: Wiring Instructions

    Wiring Instructions WARNING To prevent SERIOUS INJURY or DEATH from electrocution: - Power MUST NOT be connected until instructed. - NO exposed part of the wire should be visible outside of the terminal for proper connection. In the following section, the Photo Eye Safety System and Push Button will be connected to the Opener.

  • Page 13: Connecting Photo Eye Safety System

    Connecting Photo Eye Safety System WARNING To prevent possible SERIOUS INJURY or DEATH: - Power MUST NOT be connected BEFORE Photo Eye Safety System is connected and aligned. - The Opener will not operate until the Photo Eye Safety System is properly connected and aligned. - Install the Photo Eyes NO higher than 6”...

  • Page 14: Connecting Deluxe Door Control Console

    Connecting Deluxe Door Control Console WARNING To prevent possible SERIOUS INJURY or DEATH. - Power MUST NOT be connected until instructed. To prevent SERIOUS INJURY or DEATH from using the Deluxe Door Control Console and a closing door: - Install the Deluxe Door Control Console or Push Button within sight of the door at a minimum height of 5 feet (1.5m) above the floor.

  • Page 15: Motion Activated Security Lighting

    Motion Activated Security Lighting Using the Deluxe Door Control ONLY after Installation is completed. Buttons Operation Door - Press and release to open/close the door. Light -- Press and release to turn the courtesy light on / off. Press and hold the light button for 2s to activate / deactivate motion sensing security lighting.

  • Page 16: Connecting Power

    Connecting Power WARNING To prevent possible SERIOUS INJURY or DEATH FROM ELECTROCUTION or FIRE: - Power MUST be DISCONNECTED BEFORE proceeding with permanent wiring procedures. - Garage Door Opener installation and wiring MUST be in compliance with all local electrical and building codes.

  • Page 17: Travel Limit Adjustment Up

    Travel Limit Adjustment UP WARNING To prevent SERIOUS INJURY or DEATH from improper Force Adjustment: - DO NOT adjust force manually to compensate for binding or sticking of the garage door. Call a qualified garage door service technician to make necessary adjustments in case of binding. - DO NOT manually increase the force required for closing the door.

  • Page 18: Travel Limit Adjustment Down

    Travel Limit Adjustment DOWN WARNING To prevent SERIOUS INJURY or DEATH from improper Force Adjustment: - DO NOT adjust force to compensate binding or sticking of the garage door. Call a qualified garage door service person to make necessary adjustments in case of binding. - DO NOT increase force beyond minimum force required for closing the door.

  • Page 19: Auto Force Adjustment

    Auto Force Adjustment WARNING To prevent possible SERIOUS INJURY or DEATH: - DO NOT adjust force to compensate binding or sticking of the garage door. Call a qualified garage door service technician to make necessary adjustments in case of binding. - DO NOT increase force beyond minimum force required for closing the door.

  • Page 20: Final Adjustment And Testing

    Final Adjustments and Testing WARNING To prevent SERIOUS INJURY or DEATH from a closing garage door: - The Safety Reversal Test MUST be conducted ONCE A MONTH. - NO ONE should cross the path of and moving door during operation and / or testing. - After ANY adjustments to the door system, the Safety Reversal Test MUST be performed to ensure the door reverses on contact with a 1-1/2 inch (3.8 cm) thick (2x4 laid flat) object.

  • Page 21: Programming Remote Control

    Programming Remote Controls WARNING To prevent possible SERIOUS INJURY or DEATH: - Keep remote control and battery out of reach of children. - NEVER permit children to access the Deluxe Door Control Console or Remote Controls. - Operate the door ONLY when it is properly adjusted, and there are no obstructions present. - ALWAYS keep a moving door in sight until completely closed.

  • Page 22: Important Safety Instructions

    Important Safety Instructions IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of severe injury or death: 1. READ AND FOLLOW ALL INSTRUCTIONS. 2. Never let children operate or play with door controls. Keep the remote control away from children. 3. Always keep the moving door in sight and away from people and objects until it is completely loose.

  • Page 23: Operating The Opener

    Operating the Opener WARNING To Prevent SERIOUS INJURY or DEATH: - READ AND FOLLOW ALL INSTRUCTIONS AND WARNINGS IN THE OWNER’S MANUAL AND LABELS. - Keep Remote Control and battery out of reach of children. - NEVER permit children to access the Door Control Console, Push Button or Remote Controls. - Operate the door ONLY when it is properly adjusted, and there are no obstructions and is in clear sight.
  • Page 24 Operating the Opener WARNING To prevent SERIOUS INJURY or DEATH: - Use emergency release to disconnect the motor ONLY when the door is CLOSED to prevent unexpected rapid falling in case of a unbalanced / poor-conditioned door. - Use emergency release ONLY when doorway is clear of persons and obstructions. - DO NOT use emergency release to pull the door open or closed.

  • Page 25: V3 Installation

    beam Smart Controller Installation (Optional) WARNING To reduce the risk of INJURY to persons: - Disconnect ALL electric power BEFORE performing ANY service or maintenance. - Operate the door ONLY when it is properly adjusted, and there are no obstructions present. - Use this Smart Garage Door Controller only with Residential Sectional Garage Doors.

  • Page 26: Installing Battery Backup And Status Indicator

    To reduce the risk of FIRE or INJURY to persons: - Disconnect ALL electric and battery power BEFORE performing ANY service or maintenance. - Use ONLY Guardian part for replacement battery. - DO NOT dispose of battery in fire. Battery may explode. Check with local codes for disposal instructions.

  • Page 27: Backup Battery Features And Motion-Sensing Light

    Backup Battery Features WARNING - RISK OF EXPLOSIVE GASES: To reduce risk of battery explosion, follow ALL instructions and warnings on the battery pack - DO NOT touch eyes while working near batteries. - NEVER smoke or allow a spark or flame in the vicinity of battery or engine. - DO NOT drop ANY metal tools onto the battery.

  • Page 28: Maintenance And Troubleshooting

    (Refer to pages 17-19 to reset the travel limits & travel force). SYMPTOM: During limit learn mode, if door travels only 1” to 28” then stops. • Check RPM encoder connections or replace RPM encoder (call service tech). Please contact Guardian Tech Support for further assistance. www.adhguardianusa.com...
  • Page 29 The door is obstructed during travel (Refer to pages 17-19 to reset the travel limits and the travel force). Please contact Guardian Tech Support for further assistance. SYMPTOM: Door travels 1” to 12” then stops, and beeps 25 times • Remove soft settings by pressing the LIMIT and FORCE BUTTONS simultaneously for 2 seconds and reset Up / Down and Force limits.

  • Page 30: Installation And Accessory Parts

    Repair Parts Installation Parts Name/Description Part number GUAT-027 Header Bracket GUAT-022 Door Bracket GUAT-023 Hardware Bag GUAT-024 Curved Door Arm GUAT-025 Straight Door Arm GUAT-026 Emergency Release Handle & Rope Accessories Name/Description Part number GUAT-201 Photo Eyes Remote Control 3-FDCC Deluxe Door Control Console CR2032 Remote Control Battery (CR2032)

  • Page 31: Opener Assembly Parts

    Opener Assembly Parts Name/ Description Part number 1 GUDT-301 Chassis 2 GUDT-323 DC Motor (with encoder shaft) 3 GUDT-314 Encoder Module 4 GUDT-403 Opener Cover 5 GUDT-321 Transformer 6 GUDT-309 Lamp Plate 7 GUDT-404 Logic Board 8 GUDT-405 Back Panel (Holster-mount) 9 GUDT-311W Light Lens Clip 10 GUDT-310...

  • Page 32: Warranty

    Your operator has been installed by a professional installation specialist. If service information is required please contact the installing company or your local Guardian dealer. Look for your Guardian dealer on line, in the yellow pages or call our service number for a dealer near you.

Table of Contents

Save PDF