~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 6
Screw the mounting brackets (3) to the rear of the vehicle on both sides. WARNING: Use a liquid threadlocker! Do not tighten the screws (4) yet. × Note: In order to mount the side carrier together with the SW-MOTECH rack,use the rack spacers (*) as indicated in the detailed drawing. 23 Nm ×...
Page 10
~ 0.5 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 17
Screw the license plate, the license plate holder and the crossbar (*) included × with the SW-MOTECH side carrier to the parts shown on the adapter plate (1). WARNING: Use liquid thread locker (only screw (4))! Tighten the screw (4) according to the manufacturer's instructions.
Need help?
Do you have a question about the BC.SYS.22.995.21100/B and is the answer not in the manual?
Questions and answers