SW-Motech ADV.22.995.66100/B Mounting Instructions

Hide thumbs

page of 75

/ 75
Bookmarks

Quick Links

Download this manual

ANBAUANLEITUNG

mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio

ADV.22.995.66100/B

beinhaltet • contains • contient • contiene • contiene

KFT.22.995.30001/B

KFT.22.995.80000/B

KFT.00.152.36000

GPT.22.995.19000/B

GPT.00.152.36200/B

HSK.00.745.10001/B

HSK.00.745.11001/B

HSK.00.745.12000/B

LOC.00.745.10200

Need help?

Do you have a question about the ADV.22.995.66100/B and is the answer not in the manual?

Questions and answers

Summary of Contents for SW-Motech ADV.22.995.66100/B

Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio ADV.22.995.66100/B beinhaltet • contains • contient • contiene • contiene KFT.22.995.30001/B KFT.22.995.80000/B KFT.00.152.36000 GPT.22.995.19000/B GPT.00.152.36200/B HSK.00.745.10001/B HSK.00.745.11001/B HSK.00.745.12000/B LOC.00.745.10200...
Page 2 ~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 3 Do not use thread lock: Indicates that no liquid thread lock should be used at this point. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 4 M6 x 25; ISO 7380 Ø 20 / Ø 6.4 / h 5 M6; DIN 6927 KFT.06.525.005.11 SC.ST.06.025.02.7380.109 DB.ST.0200.0064.0050.02 MU.ST.06.02.6927.08 KFT.22.995.971.01.11 KFT.22.995.972.01.11 KFT.00.152.SV.8 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 5 WARNING: Always use appropriate tools! Remove the screws indicated as well as the passenger footrests on both sides of the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 6 Screw the mounting brackets (3) to the rear of the vehicle on both sides. WARNING: Use a liquid threadlocker! Do not tighten the screws (4) yet. × Note: In order to mount the side carrier together with the SW-MOTECH rack,use the rack spacers (*) as indicated in the detailed drawing. 23 Nm ×...
Page 7 Screw the crossbar (7) to your license plate on the license plate holder. × Do not tighten the screws yet. × 9.6 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 8 When all components are loosely in proper position, tighten the screws as specified.  NOTE: Anti-theft protection is sold separately. × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 9 TÜV regulations. After assembly, parts that are subject to registration should be entered in the vehicle documents by your test center. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 10 ~ 0.5 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 11 Do not use thread lock: Indicates that no liquid thread lock should be used at this point. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 12 ø 6.4; DIN 125 Ø 16 / ø 6,4 / h 6 M6; DIN 985 SC.ST.06.030.01.912.088 SC.ST.06.016.01.912.088 US.ST.064.01.125 DB.00.160.064.006.01 MU.ST.06.01.985.08 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 13  WARNING: Always use the proper tools! Unscrew the three screws and remove the license plate holder from the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 14 Screw the adapter plate (1) to the vehicle. ×  WARNING: Use a liquid threadlocker! Tighten the screws (2) according to the manufacturer's instructions. × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 15 Screw the original license plate holder (Orig.) loosely onto the vehicle with the × screw (4). Do not tighten the screw (4) yet. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 16  WARNING: Risk of injury! Drill two 1/4" holes through the license plate holder at the two marks. Then deburr the bore edges. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 17 Screw the license plate, the license plate holder and the crossbar (*) included × with the SW-MOTECH side carrier to the parts shown on the adapter plate (1).  WARNING: Use liquid thread locker (only screw (4))! Tighten the screw (4) according to the manufacturer's instructions.
Page 18 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 19 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 20 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 21 M6 x 12; ISO 7380 M6 x 25; DIN 7991 M6; DIN 6927 HSK.00.745.025.35GR SC.ST.06.012.02.7380.109 GPT.00.152.010.35 SC.ST.06.025.02.7991.088 MU.ST.06.02.6927.08 KFT.00.152.026.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 22 Tighten the screws as specified in the mounting instructions. 9 Nm Then insert the rubber dampeners (6) into the indicated openings. × × 9 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 23 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 24 ~ 0.5 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 25 Direction arrow: Shows the orientation of the vehicle in Indicates the tightening torque of a part specified by the illustration. SW-MOTECH or the vehicle manufacturer (OEM). The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG...
Page 26 KES.RD.213.0850.02.GLZ SC.00.08.030.02.7380 DB.ST.0200.0082.0090.02 M6 x 18; ISO 7380 ø 6.4; DIN 9021 M6; DIN 6927 GPT.00.152.002.11 SC.ST.06.018.02.7380.109 US.ST.064.02.9021 MU.ST.06.02.6927.08 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 27  WARNING: Always use suitable tools!  NOTE: Two-sided assembly. Remove the original plastic plugs from both sides of the rear of the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 28  WARNING: Use a liquid threadlocker! Tighten the screws according to the manufacturer's instructions. × × × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 29 Mount the rack (6) on mounting struts (1) and (2). Tighten the screws as specified. × × 10 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 30 TÜV regulations. After assembly, parts that are subject to registration should be entered in the vehicle documents by your test center. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 31 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 32 Indicates the tightening torque of a part specified by SW- strength; M (MEDIUM): medium strength; L (LOW): MOTECH or the vehicle manufacturer (OEM). low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 33 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! M6 x 14; ISO 7380 M6 x 25; DIN 7991 HSK.00.745.025.35GR SC.ST.06.014.02.7380.109 GPT.00.152.035.02 GPT.00.152.010.35 SC.ST.06.025.02.7991.088 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 34  WARNING: Use a liquid threadlocker! Tighten the screws as specified in the mounting instructions. × 9 Nm × × × 9 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 35 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 36 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 37 Tighten by hand: Indicates that the attachment must be thread lock should be used at this point. carefully tightened by hand. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 38 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.80000/B HSK.00.745.027.02 4 x 10; WN 1452 HSK.00.745.047.02 SC.ST.040.010.48.1452.109 TRX.T20 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 39 1.1 - Press the DUSC release button (1) and pull the lid latch buckle to the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 40 When closing the lid, make sure that the lid limiters (2) are not trapped between the lid and the case body. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 41 (5). Carefully tighten the screws by hand.  WARNING: Over-tightening the screws may damage the lock casing! × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 42 4.2 - Press the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH rack. 4.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH rack.
Page 43 5.2 - Slide the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH side carrier. 5.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH side carrier.
Page 44 When reassembling the inlays, make sure to carefully push them behind the frame profiles. Also, press the inlay in the case body onto the Velcro strips. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 45  NOTE: Surface materials may be subject to fluctuations in color (fading) in the event of prolonged and intensive exposure to sunlight and the elements (e.g. smog, acid rain, etc.)! SW-MOTECH is not responsible for this type of wear! The content translation is automated.
Page 46  DANGER: The maximum vehicle load defined by the vehicle manufacturer may NOT be exceeded. The maximum permissible load of the SW-MOTECH rack/side rack may NOT be exceeded; make sure to take into account the dead weight of the product.
Page 47 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 48 Tighten by hand: Indicates that the attachment must be thread lock should be used at this point. carefully tightened by hand. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 49 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.80000/B HSK.00.745.027.02 4 x 10; WN 1452 HSK.00.745.047.02 SC.ST.040.010.48.1452.109 TRX.T20 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 50 1.1 - Press the DUSC release button (1) and pull the lid latch buckle to the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 51 When closing the lid, make sure that the lid limiters (2) are not trapped between the lid and the case body. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 52  WARNING: Over-tightening the screws may damage the lock casing!  NOTE: Ensure that the locking mechanism is in working order! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 53 4.2 - Press the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH rack. 4.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH rack.
Page 54 5.2 - Slide the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH side carrier. 5.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH side carrier.
Page 55 When reassembling the inlays, make sure to carefully push them behind the frame profiles. Also, press the inlay in the case body onto the Velcro strips. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 56  NOTE: Surface materials may be subject to fluctuations in color (fading) in the event of prolonged and intensive exposure to sunlight and the elements (e.g. smog, acid rain, etc.)! SW-MOTECH is not responsible for this type of wear! The content translation is automated.
Page 57  DANGER: The maximum vehicle load defined by the vehicle manufacturer may NOT be exceeded. The maximum permissible load of the SW-MOTECH rack/side rack may NOT be exceeded; make sure to take into account the dead weight of the product.
Page 58 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 59 Tighten by hand: Indicates that the attachment must be thread lock should be used at this point. carefully tightened by hand. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 60 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.80200/B HSK.00.745.027.02 4 x 10; WN 1452 HSK.00.745.047.02 SC.ST.040.010.48.1452.109 TRX.T20 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 61 1.1 - Press the DUSC release button (1) and pull the lid latch buckle to the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 62 When closing the lid, make sure that the lid limiters (2) are not trapped between the lid and the case body. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 63  WARNING: Over-tightening the screws may damage the lock casing!  NOTE: Ensure that the locking mechanism is in working order! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 64 4.2 - Press the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH rack. 4.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH rack.
Page 65 When reassembling the inlays, make sure to carefully push them behind the frame profiles. Also, press the inlay in the case body onto the Velcro strips. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 66  NOTE: Surface materials may be subject to fluctuations in color (fading) in the event of prolonged and intensive exposure to sunlight and the elements (e.g. smog, acid rain, etc.)! SW-MOTECH is not responsible for this type of wear! The content translation is automated.
Page 67  DANGER: The maximum vehicle load defined by the vehicle manufacturer may NOT be exceeded. The maximum permissible load of the SW-MOTECH rack/side rack may NOT be exceeded; make sure to take into account the dead weight of the product.
Page 68 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 69 ASSEMBLY section, the vehicle manufacturer's our online shop: specifications must be observed and applied. www.sw-motech.com The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 70 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.500.04 TRX.T20 ALK.00.165.A63 ALK.00.165.562.01 QLS.00.095.520.01 SV.ST.095.007.LK.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 71 1.1 - Press the DUSC release button (*) and pull the lid latch buckle into the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 72  NOTE: Ensure that the locking mechanism is in working order! ×  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 73 Secure the lock (4) on the inside with the safety clip  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 74 4.4 - Then the anti-theft protection device (5) must be secured against unscrewing.  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 75 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.

This manual is also suitable for:

Kft.22.995.30001/b Kft.22.995.80000/b Kft.00.152.36000 Gpt.22.995.19000/b Gpt.00.152.36200/b Hsk.00.745.10001/b ... Show all