Download Print this page

Advertisement

Quick Links

ANBAUANLEITUNG
mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio
ADV.22.995.65000/B
beinhaltet • contains • contient • contiene • contiene
KFT.22.995.30001/B
KFT.00.152.36000
GPT.22.995.19000/B
GPT.00.152.36200/B
HSK.00.745.10001/B
HSK.00.745.11001/B
LOC.00.745.10200

Advertisement

loading
Need help?

Need help?

Do you have a question about the ADV.22.995.65000/B and is the answer not in the manual?

Questions and answers

Summary of Contents for SW-Motech ADV.22.995.65000/B

  • Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio ADV.22.995.65000/B beinhaltet • contains • contient • contiene • contiene KFT.22.995.30001/B KFT.00.152.36000 GPT.22.995.19000/B GPT.00.152.36200/B HSK.00.745.10001/B HSK.00.745.11001/B LOC.00.745.10200...
  • Page 2 ~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
  • Page 3 Do not use thread lock: Indicates that no liquid thread lock should be used at this point. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 4 M6 x 25; ISO 7380 Ø 20 / Ø 6.4 / h 5 M6; DIN 6927 KFT.06.525.005.11 SC.ST.06.025.02.7380.109 DB.ST.0200.0064.0050.02 MU.ST.06.02.6927.08 KFT.22.995.971.01.11 KFT.22.995.972.01.11 KFT.00.152.SV.8 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 5 WARNING: Always use appropriate tools! Remove the screws indicated as well as the passenger footrests on both sides of the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 6 Screw the mounting brackets (3) to the rear of the vehicle on both sides. WARNING: Use a liquid threadlocker! Do not tighten the screws (4) yet. × Note: In order to mount the side carrier together with the SW-MOTECH rack,use the rack spacers (*) as indicated in the detailed drawing. 23 Nm ×...
  • Page 7 Screw the crossbar (7) to your license plate on the license plate holder. × Do not tighten the screws yet. × 9.6 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 8 When all components are loosely in proper position, tighten the screws as specified.  NOTE: Anti-theft protection is sold separately. × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 9 TÜV regulations. After assembly, parts that are subject to registration should be entered in the vehicle documents by your test center. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 10 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
  • Page 11 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 12 M6 x 12; ISO 7380 M6 x 25; DIN 7991 M6; DIN 6927 HSK.00.745.025.35GR SC.ST.06.012.02.7380.109 GPT.00.152.010.35 SC.ST.06.025.02.7991.088 MU.ST.06.02.6927.08 KFT.00.152.026.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 13 Tighten the screws as specified in the mounting instructions. 9 Nm Then insert the rubber dampeners (6) into the indicated openings. × × 9 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 14 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 15 ~ 0.5 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
  • Page 16 Direction arrow: Shows the orientation of the vehicle in Indicates the tightening torque of a part specified by the illustration. SW-MOTECH or the vehicle manufacturer (OEM). The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG...
  • Page 17 KES.RD.213.0850.02.GLZ SC.00.08.030.02.7380 DB.ST.0200.0082.0090.02 M6 x 18; ISO 7380 ø 6.4; DIN 9021 M6; DIN 6927 GPT.00.152.002.11 SC.ST.06.018.02.7380.109 US.ST.064.02.9021 MU.ST.06.02.6927.08 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 18  WARNING: Always use suitable tools!  NOTE: Two-sided assembly. Remove the original plastic plugs from both sides of the rear of the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 19  WARNING: Use a liquid threadlocker! Tighten the screws according to the manufacturer's instructions. × × × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 20 Mount the rack (6) on mounting struts (1) and (2). Tighten the screws as specified. × × 10 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 21 TÜV regulations. After assembly, parts that are subject to registration should be entered in the vehicle documents by your test center. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 22 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
  • Page 23 Indicates the tightening torque of a part specified by SW- strength; M (MEDIUM): medium strength; L (LOW): MOTECH or the vehicle manufacturer (OEM). low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 24 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! M6 x 14; ISO 7380 M6 x 25; DIN 7991 HSK.00.745.025.35GR SC.ST.06.014.02.7380.109 GPT.00.152.035.02 GPT.00.152.010.35 SC.ST.06.025.02.7991.088 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 25  WARNING: Use a liquid threadlocker! Tighten the screws as specified in the mounting instructions. × 9 Nm × × × 9 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 26 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 27 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
  • Page 28 Tighten by hand: Indicates that the attachment must be thread lock should be used at this point. carefully tightened by hand. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 29 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.80000/B HSK.00.745.027.02 4 x 10; WN 1452 HSK.00.745.047.02 SC.ST.040.010.48.1452.109 TRX.T20 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 30 1.1 - Press the DUSC release button (1) and pull the lid latch buckle to the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 31 When closing the lid, make sure that the lid limiters (2) are not trapped between the lid and the case body. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 32 (5). Carefully tighten the screws by hand.  WARNING: Over-tightening the screws may damage the lock casing! × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 33 4.2 - Press the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH rack. 4.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH rack.
  • Page 34 5.2 - Slide the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH side carrier. 5.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH side carrier.
  • Page 35 When reassembling the inlays, make sure to carefully push them behind the frame profiles. Also, press the inlay in the case body onto the Velcro strips. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 36  NOTE: Surface materials may be subject to fluctuations in color (fading) in the event of prolonged and intensive exposure to sunlight and the elements (e.g. smog, acid rain, etc.)! SW-MOTECH is not responsible for this type of wear! The content translation is automated.
  • Page 37  DANGER: The maximum vehicle load defined by the vehicle manufacturer may NOT be exceeded. The maximum permissible load of the SW-MOTECH rack/side rack may NOT be exceeded; make sure to take into account the dead weight of the product.
  • Page 38 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
  • Page 39 Tighten by hand: Indicates that the attachment must be thread lock should be used at this point. carefully tightened by hand. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 40 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.80000/B HSK.00.745.027.02 4 x 10; WN 1452 HSK.00.745.047.02 SC.ST.040.010.48.1452.109 TRX.T20 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 41 1.1 - Press the DUSC release button (1) and pull the lid latch buckle to the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 42 When closing the lid, make sure that the lid limiters (2) are not trapped between the lid and the case body. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 43  WARNING: Over-tightening the screws may damage the lock casing!  NOTE: Ensure that the locking mechanism is in working order! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 44 4.2 - Press the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH rack. 4.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH rack.
  • Page 45 5.2 - Slide the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH side carrier. 5.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH side carrier.
  • Page 46 When reassembling the inlays, make sure to carefully push them behind the frame profiles. Also, press the inlay in the case body onto the Velcro strips. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 47  NOTE: Surface materials may be subject to fluctuations in color (fading) in the event of prolonged and intensive exposure to sunlight and the elements (e.g. smog, acid rain, etc.)! SW-MOTECH is not responsible for this type of wear! The content translation is automated.
  • Page 48  DANGER: The maximum vehicle load defined by the vehicle manufacturer may NOT be exceeded. The maximum permissible load of the SW-MOTECH rack/side rack may NOT be exceeded; make sure to take into account the dead weight of the product.
  • Page 49 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
  • Page 50 ASSEMBLY section, the vehicle manufacturer's our online shop: specifications must be observed and applied. www.sw-motech.com The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 51 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.500.04 TRX.T20 ALK.00.165.A63 ALK.00.165.562.01 QLS.00.095.520.01 SV.ST.095.007.LK.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 52 1.1 - Press the DUSC release button (*) and pull the lid latch buckle into the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 53  NOTE: Ensure that the locking mechanism is in working order! ×  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 54 Secure the lock (4) on the inside with the safety clip  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 55 4.4 - Then the anti-theft protection device (5) must be secured against unscrewing.  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 56 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.