Advertisement
Quick Links
ANBAUANLEITUNG
mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio
BC.SYS.11.608.21000/B
beinhaltet • contains • contient • contiene • contiene
KFT.11.608.30000/B
SYS.00.001.13100
SYS.00.006.10000L/B
SYS.00.006.10000R/B
BC.SYS.00.006.10000
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SW-Motech BC.SYS.11.608.21000/B
Summary of Contents for SW-Motech BC.SYS.11.608.21000/B
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio BC.SYS.11.608.21000/B beinhaltet • contains • contient • contiene • contiene KFT.11.608.30000/B SYS.00.001.13100 SYS.00.006.10000L/B SYS.00.006.10000R/B BC.SYS.00.006.10000...
-
Page 2: Safety Warning Symbol
~ 0.75 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available. - Page 3 Indicates the tightening torque of a part specified by SW- strength; M (MEDIUM): medium strength; L (LOW): MOTECH or the vehicle manufacturer (OEM). low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 Ø 25 / ø 8,4 / h 5 M8 x 20; DIN 912 SC.ST.08.080.01.7991.088 DB.ST.140.084.022.01 DB.00.250.084.005.01 KFT.11.953.001.11 SC.ST.08.020.01.912.088 KFT.11.608.001.11 KFT.11.953.971.01.11 KFT.11.953.972.02.11 KFT.00.152.SV.8 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 Remove the passenger seat and seat from the vehicle. In vehicles with heated seats, the connector on the seat must be removed. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Remove the screws shown, loosen the connector, and remove the control unit with the cover from the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 Remove the screws and nuts (as shown in drawing) from both sides of the rear of the vehicle. Then remove the passenger footrest from the left side of the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 8 Do not tighten screws (2), (7), (11) and (Orig.) yet. × × 20 Nm × × × × 20 Nm × × × 20 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 9 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! NOTE: The SW-MOTECH anti-theft protection devices are available separately; × mount the anti-theft protection devices on both sides at the marked position. Connect the side carriers (13) and (14) with the quick-release fasteners (15) to fastening straps (1), (6), and (10) as well as to the crossbar (12).
- Page 10 Tighten the original (Orig.) screws according to the manufacturer's instructions. Reattach the seat and passenger seat to the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 11 Association for Technical Inspection) regulations. After assembly, parts that are subject to registration should be entered into the vehicle documents by your test center. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the BC.SYS.11.608.21000/B and is the answer not in the manual?
Questions and answers