75
ULEAD VIDEOSTUDIO USER GUIDE
Pan & Zoom
Pan & Zoom is applied to still images, and
it emulates the pan and zoom effect of a
video camera. To apply this effect to an
image, select an image clip in the
Timeline, then select Pan & Zoom and
click Customize Pan & Zoom.
Note: Pan & Zoom cannot be applied to masked images.
In the Pan & Zoom dialog box, the Start, Middle and End tabs
and the crosshairs
in the Image Window represent the three
points (or key frames) in the image clip where settings can be
customized to produce the pan and zoom effect. When customizing
each key frame, use the Image Window to focus on an area or to
pan the image; use the tab settings to customize the zooming
effect.
The procedure below shows an example of how to first zoom in on a
subject, then pan and zoom out to show the whole image.