Batch Capture - Ulead PYRO1394DV User Manual

62
ULEAD VIDEOSTUDIO USER GUIDE
4. Under General Information, specify a reference name for the
created or edited profile in Name of Profile.
5. Select the media types supported by the profile in Media types.
6. Under Output, you may choose to allow the profile to compress
the video file or not. Enter a brief description of the profile under
Description. Click Next.

Batch Capture

If you have a controllable DV/D8 camcorder and video footage
recorded with timecode, you can choose which video segments you
want from the tape, and then capture them all in a single session.
This is called batch capturing. You can mark the starting and end
timecodes of each segment by logging them into a capture tasks
list. After you have marked all the portions that you want, simply
click a button to start capturing the video clips specified in the list.
Press [F3] and [F4] for all the other video segments to mark for
capturing.
Note: Batch capturing can be achieved only when you are using a
DV tape and the IEEE-1394 card for computer connection.
To use Batch Capture:
1. In the Capture Step, click the Batch
Capture tab in the Options Panel.
Note: The videotape automatically
plays once you click the Batch
Capture tab. Rewind or fast forward
your videotape first to cue it.
2. Mark video segments for capturing.
Press [F3] to mark the start of a
desired segment and [F4] to mark the
end of the segment.
3. Continue to play the video, and then
repeat step 2 as needed.