Ulead Videostudio User Guide; Burner Advanced Settings - Ulead PYRO1394DV User Manual

Burner Advanced Settings

• Perform test before recording: Select to simulate first (it
does not actually burn yet) the CD/DVD burning of the video
file. This will help you check if the system speed is enough to
send data to the CD/DVD writing device at a specified
recording speed. After the simulated burning, actual burning
then starts. Clear to burn the disc without performing a test.
• Buffer underrun protection: Select to use this technology
when burning your video file. This technology helps eliminate
the buffer underrun problem. Availability of this technology
depends on the disc burner you use.
• Format DVD+RW: Select to format the DVD+RW before
recording. Enabling this option will prolong the recording
process but will ensure a successful burn. This is
recommended when you are using the DVD+RW disc for the
first time.
• Do not close disc: Select to keep the CD/DVD open after the
burning process. This allows you to use the same disc to add
new files in the future using another CD/DVD burning
software.
• Quick eject: Select this function to greatly reduce the time it
takes to finish creating a short DVD when you are using a
DVD+RW drive. However, this may result in your disc having
compatibility problems with some DVD players.

ULEAD VIDEOSTUDIO USER GUIDE

141