Ulead PYRO1394DV User Manual page 105

Note: You cannot record over an existing clip. When a clip is
selected, recording is disabled. Make sure that a clip is not
selected by clicking on an empty area on the Timeline.
3. Click Record Voice. The Adjust Volume dialog box appears.
4. Speak into the microphone and check if the meter responds
accordingly. Use the Windows audio mixer to adjust the
volume of the microphone.
5. Click Start and begin speaking into the microphone.
6. Press [Esc] or click Stop to stop recording.
Tip: The best way to record narrations is to do the recording in 10 to
15-second sessions. This makes it easier to remove a badly recorded
narration and redo it. To remove, just select the clip on the Timeline
and press [Delete].
ULEAD VIDEOSTUDIO USER GUIDE
105