Ulead PYRO1394DV User Manual page 70

70
ULEAD VIDEOSTUDIO USER GUIDE
3. Click Split Video
To remove one of these clips, select the unwanted clip and press
[Delete].
To trim a clip with the Trim Bar:
1. Select a clip on the Storyboard or Timeline.
2. Click and drag the Trim handles on the Trim Bar to to set the
Mark-in/Mark-out points on the clip.
For more precise trimming, click on a Trim handle, hold it, and
use the left or right arrow keys on your keyboard to trim one
frame at a time. The Mark-in/Mark-out points can also be set by
pressing [F3] and [F4], respectively.
3. Hold down [Shift] and click Play Clip to preview only the
trimmed portion of the clip.
Tip: You can also use Zoom controls to display each frame of your
video in the Timeline and trim one frame at a time. The Scroll Bar
makes navigating through your project quicker and easier. A wheel
mouse can also be used to scroll, and to zoom by pressing [Ctrl].
To trim a clip directly on the Timeline:
1. Click a clip in the Timeline to select it.
2. Drag the yellow Trim handles
on either side of the clip to
change its length. The Preview
Window reflects the position of
the Trim handle in the clip.
Or, click the timecode in the Duration box in the Options Panel
and enter the desired clip length.
to cut the clip into two clips.