MadgeTech RFC1000-CE Product User Manual
Wireless rf transceiver & repeater
Hide thumbs
Also See for RFC1000-CE:
- User manual (4 pages) ,
- Product user manual (11 pages) ,
- Product user manual (9 pages)
Related Manuals for MadgeTech RFC1000-CE
Summary of Contents for MadgeTech RFC1000-CE
-
Page 1: Table Of Contents
Wireless RF Transceiver & Repeater PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Software Installation To view the full MadgeTech product line, visit our website at pacificsensortech.com.au. 3 Activating & Deploying the Data Logger 3 Mounting Instructions 4 Channel Programming 5 Troubleshooting... -
Page 2: Product Overview
RFC1000-CE’s as needed. Plug flexibility with mounting positions in both orientation and each one into an electrical outlet in the desired locations. proximity to metal walls. The RFC1000-CE may be used as a repeater, or directly plugged into a Windows PC. Software Installation... -
Page 3: Activating & Deploying The Data Logger
Windows PC with the provided USB cable. wireless transceivers and the MadgeTech data loggers 2. Additional RFC1000-CE’s can be used as repeaters to should be mounted in the same orientation. This usually transmit over greater distances. Plug each one into an means that the external antenna will be pointing straight up. -
Page 4: Channel Programming
Different wireless channels may be used to create multiple switches for each channel. networks in one area, or to avoid wireless interference from other devices. Any RFC1000-CE wireless transceiver or MadgeTech data logger on the same network is required CH 12... -
Page 5: Troubleshooting
Troubleshooting wireless transceiver problems Check that the software properly recognizes the connected RFC1000-CE wireless transceiver. If the wireless data logger is not appearing in the Connected Devices list, it may be that the RFC1000-CE is not properly connected. 1. In the MadgeTech 4 Software, click the File button, then click Options. -
Page 6: Compliance Information
RFC1000-CE PRODUCT USER GUIDE Compliance Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 7: Need Help
• Contact our friendly Customer Support Team at 1300 662 720. MadgeTech 4 Software Support: • Refer to the built-in help section of the MadgeTech 4 Software. • Download the MadgeTech 4 Software Manual at pacificsensortech.com.au. • Contact our friendly Customer Support Team at 1300 662 720.
Need help?
Do you have a question about the RFC1000-CE and is the answer not in the manual?
Questions and answers