Download Print this page
Toro Grandstand 161-3471 Installation Instructions
Toro Grandstand 161-3471 Installation Instructions

Toro Grandstand 161-3471 Installation Instructions

11x6.5-5 semi pneumatic caster tire kit

Advertisement

Quick Links

11x6.5-5 Semi Pneumatic Caster Tire Kit
Grandstand
Model No. 161-3471
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Caster fork assembly
Washer
Locknut
Important:
Do not install this kit on machines with the Mulch Force or Bagger attachments installed.
© 2024—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
HD Mower
Qty.
2
6
Install the kit.
2
Register at www.Toro.com.
Form No. 3467-987 Rev A
Installation Instructions
Use
*3467-987*
Original Instructions (EN)
Printed in the USA
All Rights Reserved

Advertisement

loading
Need help?

Need help?

Do you have a question about the Grandstand 161-3471 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toro Grandstand 161-3471

  • Page 1 Install the kit. Locknut Important: Do not install this kit on machines with the Mulch Force or Bagger attachments installed. *3467-987* © 2024—The Toro® Company Original Instructions (EN) 8111 Lyndale Avenue South Printed in the USA Bloomington, MN 55420 Register at www.Toro.com.
  • Page 2 Preparing the Machine Apply grease to the caster spindle on the new caster fork assembly. Park the machine on a level surface. Disengage the PTO. Move the motion-control levers outward to the position. EUTRAL Shut off the engine and remove the key. Wait for all moving parts to stop.