Toro 161-6806 Installation Instructions

Fuel Pickup with Screen Kit
Z Master 2000 and 4000 Series Units
Model No. 161-6806
Installation
1
Preparing the Machine
No Parts Required
Procedure
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
N -L position.
EUTRAL OCK
4. Engage the parking brake.
5. Shut off the engine and remove the key.
6. Wait for machine parts to cool.
© 2024—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Installing the Kit
Parts needed for this procedure:
Procedure
Note:
indicated.
Register at www.Toro.com.
2
1 Bushing
1 Rubber-compatible lubricant
1 Fuel pickup with screen
Discard all removed parts unless otherwise
1. Rotate the seat forward and disconnect the
seat-switch wire harness. Lay the seat on the
deck.
Figure 1
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3467-309 Rev A
Installation Instructions
*3467-309*
g479610