Ean/Jan 8 Check Digit; Ean/Jan 8 Addenda; Ean/Jan 8 Addenda Required - Honeywell 3800gPDF - Hand Held Decoding Linear Imager User Manual

EAN/JAN 8
* On

EAN/JAN 8 Check Digit

This selection allows you to specify whether the check digit should be transmit-
ted at the end of the scanned data or not. Default = On.
* On

EAN/JAN 8 Addenda

This selection adds 2 or 5 digits to the end of all scanned EAN/JAN 8 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On

EAN/JAN 8 Addenda Required

When Addenda Required is set to on, the imager will only read EAN/JAN 8 bar
codes that have addenda. Default = Not Required.
Required
7 - 24
Off
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required