Fagor 3 SF-6 E Operating Instructions Manual page 56

GB GB
1. PROGRAMME SWITCH
2. START BUTTON
3. ON-OFF BUTTON
5. PROGRAMME CHART
PROGRAMME SWITCH (1)
This is used to set the programme most suitable for the type of laundry and the degree
of drying desired.
The duration of the drying cycle is automatically determined by electronic control irre-
spective of the programme selected. The humidity of the laundry is constantly meas-
ured by sensors inside the drum.
So it's normal for drying cycle times to vary even for the same programme, as they de-
pend on the type of laundry, the speed of the washing machine's spin drying and the
ambient temperature.
During the cycle the switch stays on the selected programme.
START BUTTON (2)
This is to start the machine when the desired programme has been set.
ON-OFF BUTTON (3)
This is to switch the dryer on and off.
DELAY TIMER (6)
The "
SELECTION (7)
The "
DISPLAY (8)
This shows any type of data regarding the drying cycle and programming.
SAFETY DEVICES
This dryer has two safety devices:
•
an electric safety device that immediately stops the drum turning if the door is
opened during the drying cycle;
•
a thermal safety device that eliminates the risk of overheating.
C C O O N N T T R R O O L L P P A A N N E E L L
" button is used to change the delay time programming.
" and " " symbols are used to modify the cooling and drying times.
6. DELAY TIMER
7. SELECTION
8. DISPLAY
- 56 -