Table of Contents
Advertisement
10/100 Auto Negotiation Switch User's Guide
DES-3224 Technical Specifications
Switch Specifications
Complies with IEEE 802.3 CSMA/CD 10 Base-T, 100 Base-TX
Complies with IEEE 802.1d Spanning Tree
Switched IEEE 802.3 MAC layer frame size: 64-1518
NWAY Auto-negotiation for each 10 Base-T/ 100 Base-TX network port providing
auto-detection of connected cable type, auto-sensing of full and half duplex signaling
and auto-configuration
Cut-Through and Store-and-Forward switching for reliable error-free packet transfers
Native SNMP management support with Ethernet MIB II (RFC 1213), RMON MIB
(RFC 1757) and bridge MIB (RFC 1493)
8,192 maximum entries for MAC address Table
Comprehensive LED indicators display of the system/ port status
512KB EEPROM (flash memory) for firmware upgrade
RS-232 (DB-9) port for Out-of-Band management (asynchronous, 8-bit data, 1 stop
bit, no parity, 19.2 K baud)
Rack mountable (Fits standard 1.5 U EIA 19" rack)
Includes 24 10/100 Mbps Ethernet ports with built-in support of RMON and VLAN
Supports Trunking Group
Port Specifications
24 RJ-45 ports for Cat 3, 4, or 5 UTP cable (Cat. 5 req. for 100 Base-TX)
1 MDI-II Uplink port, shared with port 1, use straight cable when connecting to this
port
10 or 100 Mbps data transfer rate
NWAY Auto-negotiation
Full or Half Duplex
DES-3224 Technical Specifications
A
61
Advertisement
Table of Contents
