Spinning; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold); To Omit Rinse And Interim Spin And The Final Spin - Miele WT 2679 i WPM Operating Instructions Manual

WASHING

Spinning

The maximum final spin speed
depends on the programme chosen.
Programme
Cottons
Minimum iron
Delicates
Silks
Woollens
Express
Automatic
Dark garments
Shirts
Denim
Sportswear
Outerwear
Proofing
Curtains
Separate rinse
Starch
Drain/Spin
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
22

To omit the final spin (Rinse hold)

^ Select the Rinse hold setting. The
laundry will not be spun and will
remain suspended in the final rinse
rpm
water. This reduces creasing if the
1600
laundry is not going to be removed
1200
from the drum immediately after the
600
end of the programme.
400
– To start the final spin:
1200
The machine will display the
1600
maximum spin speed possible. You
1200
can select a spin speed lower than
1200
this. Start the final spin by pressing
600
the Start / Stop button.
900
– To end the programme:
1200
800
Press the Door button. The water will
drain away. Press the Door button
1000
again to open the door.
600
1200
To omit rinse and interim spin and
1500
the final spin
1600
^ Select the Without spin setting. The
laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage. An additional rinse
is introduced if this setting is selected
with the Cottons , Minimum iron ,
Express and Automatic programmes.