Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele W 3364 WPS Operating Instructions Manual

Final spin speed

Programme
Cottons
Minimum iron
Delicates
Automatic
Dark garments
Shirts
Denim
Express
Silks
Woollens
Drain/Spin
Separate rinse/Starch
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.

To omit the final spin (Rinse hold)

^ Select the Rinse hold setting. The
rpm
laundry will not be spun and will
1600
remain suspended in the final rinse
1200
water. This reduces creasing if the
600
laundry is not going to be removed
900
from the drum immediately after the
1200
end of the programme.
600
– To start the final spin:
900
1600 The Rinse hold indicator light above
the "Spin" button will be lit up. Use
400
the "Spin" button to select the spin
1200
speed you want. The final spin will
1600
then begin.
1200
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin
^ Select the Without spin setting. The
laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage. An additional rinse
is introduced if this setting is selected
with the Cottons , Minimum Iron and
Automatic programmes.

Spinning

19