Setting The Water Level Adjustment - Whirlpool D50B0 Use & Care Manual

Using Your Dehumidifier
Contlnusd
Watsr tsvsl
adjustment
Nor&al fill Maximum RII
Setting the water level
adiustment
The-Water Level Adjustment can be set in two
positions to turn off the unit automatically when
the pan is full. This prevents the danger of
overflow.
Pan must be in proper position for Water Level
Control Switch to work.
l
NORMAL FILL-et Water Level Adjustment to
the indentation on the left side. The water pan
and water will weigh approximately 7.2 kg
(16 lbs.) and water pan will be % full.
l
MAXMUM FILL-et Water Level Adjustment to
the raised area on the right side. The water pan
and water will weigh approximately 10.8 kg
(24 Ibs.) and water pan will be % full.
The Water Level Control Switch will automatically
turn off the dehumidifier at the fill level you
selected when pan is properly placed. Loosen the
screw to move the Water Level Adjustment.
Retighten screw when adjusted to desired
setting.