Related Manuals for Aeropro R100
Summary of Contents for Aeropro R100
- Page 1 封面 Model No. R100 Low Volume Low Pressure Spray Gun Optional Nozzle:0.8-1.5mm - 1 -...
-
Page 2: Specifications And Technical Data
CONTAIN: Description Specification and Technical Data Important Safety Instruction Instructions for Operation Maintenance/Storing Troubleshooting/Repairs Parts List Description Low volume low pressure technology applies paint with less force, meaning less "bounce" of the surface into the air, Stainless steel needle and nozzle to accommodate a variety of coatings, Just the paint gun for covering small areas and touch-up work. -
Page 3: Important Safety Instructions
Important Safety Instructions 1.For toxic vapors produced by spraying certain materials can create intoxication and serious damage to health. Always wear safety glasses, gloves and respirator to prevent the toxic vapor hazard, solvent and pointing paint coming into contact your eyes or skin. (see fig 1) 2.Never use oxygen, combustible or any other bottle gas as a power source or would cause explosion and serious personal injury. -
Page 4: Operation
WARNING Never aim or spray at yourself or anybody else which would cause serious injury. 7. Test the consistency of the material by making a few strokes on a cardboard target. If material still appears too thick, add a small amount of thinner. THIN WITH CARE! Do not exceed paint manufacturer’s thinning recommendations. -
Page 5: Maintenance
Maintenance Incomplete cleaning could cause function failures and a degradation of the fan form. 1. Remove any remaining paint by pouring it into another container. 2. Disassemble the spray gun making sure to remove the needle before disassembling the nozzle to avoid damage to the housing of the nozzle closure. -
Page 6: Troubleshooting
Trouble shooting Symptom Problems Solution Fluttering or 1. Material level tool low. 1. Add material into container. spitting 2. Container tipped too far. 2. Hold more upright. 3. Loose fluid inlet connection. 3. Tighten. 4. Loose or damaged fluid tip/seat. 4. -
Page 7: Parts List
Parts List Description Description Description Air Adj. Screw O-ring(3.5*1.5) Air Adj. Knob Spring Washer Fliter O-ring(2.5*2.1) Fluid Inlet Plug Spring Compressor screw Needle Sealing Washer Trigger Spring Screw Trigger Pin Valve Needle Rounded Nut Valve Inlet Spring Housing Air Cap Washer Switch Spring Spring Atomization... - Page 8 封底 - 8 -...
Need help?
Do you have a question about the R100 and is the answer not in the manual?
Questions and answers