Performance Features - D-Link DES-1004 User Manual

10/100 Fast Ethernet Switch User's Guide
The Switches are an unmanaged 10/100 Fast Ethernet Switch that offers
solutions in accelerating small Ethernet workgroups' bandwidths. Other key
features are:
4 or 8 UTP/STP ports (depending on model) all come with auto-negotiation
and operate at 10/100 Mbps for connection to servers and hubs. All ports
can be configured for full or Half-duplex operation.
Uplink/ MDI-II (media dependent interface)
another switch, hub or repeater. Please note that if you are using the
uplink port, you will not be able to use port one (1x) because these
ports are logically connected.

Performance features

Store and forward switching scheme capability to support rate
adaptation and ensures data integrity.
N-way Auto-negotiation for any port. This allows for auto-sensing of
speed (10/100 Mbps)and auto-detecting mode (Full-duplex or Half-
duplex) thereby providing you with automatic and flexible solutions
in your network connections.
Auto polarity detection for correction of incorrect polarity on the
receive twisted pair at each port.
Data forwarding rate 148,800 pps per port at 100% of wire-speed for
100Mbps speed.
Data forwarding rate 14,880 pps per port at 100% of wire-speed for
10Mbps speed.
Data filtering rate eliminates all error packets, runts, etc. at 148,800
pps per port at 100% of wire-speed for 100Mbps speed.
Data filtering rate eliminates all error packets, runts, etc. at 14,880 pps
per port at 100% of wire-speed for 10Mbps speed.
4
port for uplink to
Introduction