Advanced Setup
Setting the Advanced Setup
When you change the Advanced Setup setting, perform
the procedures below.
For example: Remote ID setting procedure
/
/
/
SET UP
1
Turn on the power.
2
Press the [RECEIVER] REMOTE
MODE button, followed by the
SETUP button on the remote
controller.
The setup menu appears in the display.
3
RECEIVER
4
VOLUME
ENTER
5
6
Use the Up and Down [
buttons to select "1. Hardware
set," and then press [ENTER].
The Hardware setup menu appears in
the display.
Use the Up and Down [
buttons to select "Remote ID: 1"
indication.
Change the Remote ID to "3"
using the Left and Right [
buttons.
Press the SETUP button on the
remote controller to complete the
setting.
]/[
]
]/[
]
]/[
]
33